Photoconductivity measurements of CH3NH3PbI3 deposited between two dielectric-protected Au electrodes show extremely slow response. The CH3NH3PbI3, bridging a gap of ∼2000 nm, was subjected to a DC bias and cycles of 5 min illumination and varying dark duration. The approach to steady -state photocurrent lasted tens of seconds with a strong dependence on the dark duration preceding the illumination. On the basis of DFT calculations, we propose that under light + bias the methylammonium ions are freed to rotate and align along the electric field, thus modifying the structure of the inorganic scaffold. While ions alignment is expected to be fast, the adjustment of the inorganic scaffold seems to last seconds as reflected in the extremely slow photoconductivity response. We propose that under working conditions a modified, photostable, perovskite structure is formed, depending on the bias and illumination parameters. Our findings seem to clarify the origin of the well-known hysteresis in perovskite solar cells.

In the pursuit to better understand the mechanisms of perovskite solar cells we performed Raman and photoluminescence measurements of free-standing CH3NH3PbI3 films, comparing dark with working conditions. The films, grown on a glass substrate and sealed by a thin glass coverslip, were measured subsequent to dark and white-light pretreatments. The extremely slow changes we observe in both the Raman and photoluminescence cannot be regarded as electronic processes, which are much faster. Thus, the most probable explanation is of slow photoinduced structural changes. The CH3NH3PbI3 transformation between the dark and the light structures is reversible, with faster rates for the changes under illumination. The results seem to clarify several common observations associated with solar cell mechanisms, like performance improvement under light soaking. More important is the call for solar-cell-related investigation of CH3NH3PbI3 to take the photoinduced structural changes into consideration when measuring and interpreting the results.

Bisquert and colleagues demonstrate the impact of positive charge accumulation at the electron contact of perovskite solar cells.

With solar conversion efficiencies surpassing 20%, organometallic perovskites show tremendous promise for solar cell technology. Their high brightness has also led to demonstrations of lasing and power-efficient electroluminescence. Here we show that thin films of methylammonium lead iodide, prepared by solution processing at temperatures not exceeding 100 °C, exhibit a highly nonlinear intensity-dependent refractive index due to changes in the free-carrier concentration and for femtosecond excitation at higher intensities undergo saturation that can be attributed to the Pauli blocking effect. Nonlinear refractive index and nonlinear absorption coefficients were obtained by the Z-scan technique, performed simultaneously in open- and closed-aperture configurations. Both nanosecond- and femtosecond-pulsed lasers at multiple wavelengths were used in order to distinguish between the mechanisms inducing the nonlinearities. The magnitude and sign of the nonlinear refractive index n 2 were determined. For resonant excitation, free carrier generation is the dominant contribution to the nonlinear refractive index, with a large nonlinear refractive index of n 2 = 69 × 10–12 cm2/W being observed for resonant femtosecond pumping and n 2 = 34.4 × 10–9 cm2/W for resonant nanosecond pumping. For nonresonant femtosecond excitation, bound-charge-induced nonlinearity leads to n 2 = 36 × 10–12 cm2/W. These values are equivalent to the best reported metrics for conventional semiconductors, suggesting that organometallic perovskites are promising materials for optical switching and bistability applications.

In this study we systematically explored the mixed cation perovskite Csx(CH3NH3)1−xPbI3.

Registro de acceso restringido Este recurso no está disponible en acceso abierto por política de la editorial. No obstante, se puede acceder al texto completo desde la Universitat Jaume I o si el usuario cuenta con suscripción. Registre d'accés restringit Aquest recurs no està disponible en accés obert per política de l'editorial. No obstant això, es pot accedir al text complet des de la Universitat Jaume I o si l'usuari compta amb subscripció. Restricted access item This item isn't open access because of publisher's policy. The full--text version is only available from Jaume I University or if the user has a running suscription to the publisher's contents.

Interface engineering through passivating agents, in the form of organic molecules, is a powerful strategy to enhance the performance of perovskite solar cells. Despite its pivotal function in the development of a rational device optimization, the actual role played by the incorporation of interfacial modifications and the interface physics therein remains poorly understood. Here, we investigate the interface and device physics, quantifying charge recombination and charge losses in state-of-the-art inverted solar cells with power conversion efficiency beyond 23% - among the highest reported so far - by using multidimensional photoluminescence imaging. By doing that we extract physical parameters such as quasi-Fermi level splitting (QFLS) and Urbach energy enabling us to assess that the main passivation mechanism affects the perovskite/PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) interface rather than surface defects. In this work, by linking optical, electrical measurements and modelling we highlight the benefits of organic passivation, made in this case by phenylethylammonium (PEAI) based cations, in maximising all the photovoltaic figures of merit.

The high open-circuit potential (Voc) achieved by perovskite solar cells (PSCs) is one of the keys to their success. The Voc analysis is essential to understand their working mechanisms. A large number of CH3NH3PbI3-xClx PSCs were fabricated on single large-area substrates and their Voc dependencies on illumination intensity, I0, were measured showing three distinctive regions. Similar results obtained in Al2O3 based PSCs relate the effect to the compact TiO2 rather than the mesoporous oxide. We propose that two working mechanisms control the Voc in PSCs. The rise of Voc at low I0 is determined by the employed semiconductor n-type contact (TiO2 or MgO coated TiO2). In contrast, at I0 close to AM1.5G, the employed oxide does not affect the achieved voltage. Thus, a change of regime from an oxide-dominated EFn (as in the dye sensitized solar cells) to an EFn, directly determined by the CH3NH3PbI3-xClx absorber is suggested.