Perovskite electrodes have been considered as an alternative to Ni-YSZ cermet-based anodes as they afford better tolerance towards coking and impurities and due to redox stability can allow very high levels of fuel utilisation. Unfortunately performance levels have rarely been sufficient, especially for a second generation anode supported concept. A-site deficient lanthanum and calcium co-doped SrTiO3, La0.2Sr0.25Ca0.45TiO3 (LSCTA-) shows promising thermal, mechanical and electrical properties and has been investigated in this study as a potential anode support material for SOFCs. Flat multilayer ceramics cells were fabricated by aqueous tape casting and co-sintering, comprising a 450-µm thick porous LSCTA-scaffold support, a dense YSZ electrolyte and a thin layer of La0.8Sr0.2CoO3-δ (LSC)-La0.8Sr0.2FeO3-δ ( LSF)-YSZ cathode. Impregnation of a small content of Ni significantly enhanced fuel cell performance over naked LSCTA-. Use of ceria as a co-catalyst was found to improve the microstructure and stability of impregnated Ni and this in combination with the catalytic enhancement from ceria significantly improved performance over Ni impregnation alone. With addition of CeO2 and Ni to a titanate scaffold anode that had been pre-reduced at 1000 o C, a maximum powder density of 0.96Wcm -2 can be achieved at 800 o C using humidified hydrogen as fuel. The encouraging results show that an oxide anode material, LSCTA-can be used as anode support with YSZ electrolyte heralding a new option for SOFC development.

Aim: This study was designed to evaluate the effects of intrauterine transplantation of menstrual blood stem cells (MenSCs) on endometrial thickness and pregnancy outcomes in patients with refractory intrauterine adhesion (IUA). Methods: This study included a group of infertile women (n = 12, age 22-40 years), with refractory IUA. Autologous MenSCs isolated from the women's menstrual blood were expanded in vitro and transplanted into their uteruses, followed by hormone replacement therapy. Transvaginal ultrasound examination was performed to assess the endometrial thickness. Transabdominal ultrasound was conducted to detect pregnancy outcome. Results: Autologous MenSCs were successfully isolated and expanded from menstrual blood and transplanted into the uterus of each patient. A significant improvement of the endometrial thickness was observed from 3.9 ± 0.9 to 7.5 ± 0.6 mm (P < 0.001). No adverse reaction was observed. The duration of menstruation was increased from 2.4 ± 0.7 to 5.3 ± 0.6 days (P < 0.001). Five out of 12 patients achieved clinical pregnancy and the pregnancy rate was 41.7%. Conclusions: Intrauterine transplantation of autologous MenSCs results in regeneration of endometrium, a prolongation of menstrual duration and an increase rate of pregnancy in patients with refractory IUA.

High peak power density and slow performance degradation for Ni–Fe infiltrated LSCTA− anode resulted from a favourable interaction between NiFe and the perovskite backbone due to the formation of a Fe-rich oxide interface layer.

The persistent problems with Ni-YSZ cermet based SOFCs, with respect to redox stability and tolerance towards sulfur has stimulated the development of a full ceramic cell based on strontium titanate(ST)-based anodes and anode support materials, within the EU FCH JU project SCOTAS-SOFC. Three different compositions (La, Y and Nb substituted ST) have been developed as anode backbones for either 25 cm 2 or larger than 100 cm 2 cell areas. Cell performances, once infiltrated with suitable electro catalysts, exhibited a maximum power density of 0.5 W/cm 2 at 850 °C. While the ST based backbone remains intact and tolerant to redox cycles, cell performance degradation appears linked to the infiltrated electro catalysts. The materials have also been assessed with respect to their electrical and mechanical properties, in order to further evaluate their potential use as anode and anode support layers in SOFCs.