The separation and extraction of chrysin from active ingredients of natural products are of great significance, but the existing separation and extraction methods have certain drawbacks. Here, chrysin molecularly imprinted nanofiber membranes (MINMs) were prepared by means of electrospinning using chrysin as a template and polyvinyl alcohol and natural renewable resource rosin ester as membrane materials, which were used for the separation of active components in the natural product. The MINM was examined using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The adsorption performance, adsorption kinetics, adsorption selectivity, and reusability of the MINM were investigated in static adsorption experiments. The analysis results show that the MINM was successfully prepared with good morphology and thermal stability. The MINM has a good adsorption capacity for chrysin, showing fast adsorption kinetics, and the maximum adsorption capacity was 127.5 mg·g−1, conforming to the Langmuir isotherm model and pseudo-second-order kinetic model. In addition, the MINM exhibited good selectivity and excellent reusability. Therefore, the MINM proposed in this paper is a promising material for the adsorption and separation of chrysin.
In this work, rosin-based composite membranes (RCMs) were developed as selective sorbents for the preparation of dencichine for the first time. The rosin-based polymer microspheres (RPMs) were synthesized using 4-ethylpyridine as a functional monomer and ethylene glycol maleic rosinate acrylate as a crosslinking. RCMs were prepared by spinning the RPMs onto the membranes by electrostatic spinning technology. The optimization of various parameters that affect RCMs was carried out, such as the ratio concentration and voltage intensity of electrospinning membrane. The RCMs were characterized by SEM, TGA and FT-IR. The performances of RCMs were assessed, which included adsorption isotherms, selective recognition and adsorption kinetics. The adsorption of dencichine on RCMs followed pseudo-second-order and adapted Langmuir–Freundlich isotherm model. As for the RCMs, the fast adsorption stage appeared within the first 45 min, and the experimental maximum adsorption capacity was 1.056 mg/g, which is much higher than the previous dencichine adsorbents reported in the literature. The initial decomposition temperature of RCMs is 297 °C, the tensile strength is 2.15 MPa and the elongation at break is 215.1%. The RCMs have good thermal stability and mechanical properties. These results indicated that RCMs are a tremendously promising adsorbent for enriching and purifying dencichine from the notoginseng extracts.
Chrysin is a natural bioactive molecule with various groups, and it has been a challenge to separate and enrich chrysin from natural products. Molecularly imprinted polymers have been widely used in the extraction of natural products, but the number and type of functional monomers limits the separation effect. The synergistic action of multiple functional monomers can improve the separation effect. In this paper, molecularly imprinted polymers (Bi-MIPs) were prepared using methacrylic acid and acrylamide as binary functional monomers for the separation and enrichment of chrysin. The Bi-MIPs were characterized using thermogravimetric analyzer (TGA), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). The performances of Bi-MIPs were assessed, which included adsorption isotherms, selective recognition and adsorption kinetics. The experimental results show that Bi-MIPs are shaped as a uniform sphere with an abundant pocket structure on its surface. The adsorption of chrysin on the Bi-MIPs followed a pseudo-second-order and adapted Langmuir–Freundlich isotherm models. The adsorption performance of the Bi-MIPs was determined at different temperatures, and the Bi-MIPs showed excellent adsorption performance at 30 °C. The initial decomposition temperature of the Bi-MIPs was 220 °C. After five times of adsorption and desorption, the adsorption performance of the Bi-MIPs decreased by only 7%. In contrast with single functional monomer molecularly imprinted polymers (Si-MIPs), the Bi-MIPs showed excellent specificity, with an imprinting factor of 1.54. The Bi-MIPs are promising materials in the separation and enrichment of chrysin for their high adsorption capacity, low cost and being environmentally friendly.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.