Biocompatible‐ingestible electronic circuits and capsules for medical diagnosis and monitoring are currently based on traditional silicon technology. Organic electronics has huge potential for developing biodegradable, biocompatible, bioresorbable, or even metabolizable products. An ideal pathway for such electronic devices involves fabrication with materials from nature, or materials found in common commodity products. Transistors with an operational voltage as low as 4–5 V, a source drain current of up to 0.5 μA and an on‐off ratio of 3–5 orders of magnitude have been fabricated with such materials. This work comprises steps towards environmentally safe devices in low‐cost, large volume, disposable or throwaway electronic applications, such as in food packaging, plastic bags, and disposable dishware. In addition, there is significant potential to use such electronic items in biomedical implants.

We report Arbuzov-type reactions of chlorofullerene C(60)Cl(6) with trialkyl phosphites producing highly functionalized fullerene derivatives C(60)[P(O)(OR)(2)](5)H with high yields. The designed family of [60]fullerene phosphonic acids and their esters showed unusual properties which might find valuable material science applications.

No abstract

Biocompatible‐ingestible electronic circuits and capsules for medical diagnosis and monitoring are currently based on traditional silicon technology. Organic electronics has huge potential for developing biodegradable, biocompatible, bioresorbable, or even metabolizable products. An ideal pathway for such electronic devices involves fabrication with materials from nature, or materials found in common commodity products. Transistors with an operational voltage as low as 4–5 V, a source drain current of up to 0.5 μA and an on‐off ratio of 3–5 orders of magnitude have been fabricated with such materials. This work comprises steps towards environmentally safe devices in low‐cost, large volume, disposable or throwaway electronic applications, such as in food packaging, plastic bags, and disposable dishware. In addition, there is significant potential to use such electronic items in biomedical implants.

No abstract

The use of dipolar aprotic solvents to swell lithiated Nafion ionomer membranes simultaneously serving as electrolyte and separator is of great interest for lithium battery applications. This work attempts to gain an insight into the physicochemical nature of a Li-Nafion ionomer material whose phase-separated nanostructure has been enhanced with a binary plasticiser comprising non-volatile high-boiling ethylene carbonate (EC) and sulfolane (SL). Gravimetric studies evaluating the influence both of mixing temperature (25 to 80 °C) and plasticiser composition (EC/SL ratio) on the solvent uptake of Li-Nafion revealed a hysteresis between heating and cooling modes. Differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) revealed that the saturation of a Nafion membrane with such a plasticiser led to a re-organisation of its amorphous structure, with crystalline regions remaining practically unchanged. Regardless of mixing temperature, the preservation of crystallites upon swelling is critical due to ionomer crosslinking provided by crystalline regions, which ensures membrane integrity even at very high solvent uptake (≈200% at a mixing temperature of 80 °C). The physicochemical properties of a swollen membrane have much in common with those of a chemically crosslinked polymer gel. The conductivity of ≈10−4 S cm−1 demonstrated by Li-Nafion membranes saturated with EC/SL at room temperature is promising for various practical applications.

The work addresses the properties of electro-transport in highly ion-conductive polymer electrolytes based on Nafion-115 membranes in the NH 4 + ionic form plasticized with dimethyl sulfoxide (DMSO). The ionic conductivity and the activation energy of the conductivity were found to exhibit three types of behavior as a function of the plasticizer. The first region (when the ratio of moles of DMSO molecules per mole of NH 4 + (n) < 6) is characterized by low conductivity values (10 −7 -10 −4 S cm −1 ) and high energy barriers (0.76 and 0.43 eV for n = 0 and 2.6, respectively). In the second region (n = 6-12), the electrolyte has a high conductivity and a low activation energy of conductivity (∼0.1 eV). With an increase in the DMSO content, the conductivity appreciably increases and reaches ∼ 0.4 mScm −1 . In the third region (n ≥ 12) the transport parameters are comparable to those of the second region, but the conductivity is practically independent of the DMSO content. The observed behavior was explained on the basis of the results obtained with the help of IR spectroscopy, differential scanning calorimetry, small-angle X-ray scattering and quantum-chemical modeling.

No abstract