SUMMARYObjectives: This study: 1) analyzed the surface roughness of five novel resin composites that contain nanoparticles after polishing with three different one-step systems and 2) evaluated the effectiveness of these polishers and their possible surface damage using scanning electron microscope (SEM) analysis. The samples were polished for 30 seconds with PoGo, OptraPol and One Gloss discs at 15,000 rpm using a slow speed handpiece. The surfaces were tested for roughness (Ra) with a surface roughness tester and examined with SEM. Oneway ANOVA was used for statistical analysis (p=0.05). MethodsResults: For all the composites tested, differences between the polishing systems were found to be significant (p<0.05). For Filtek Supreme XT, Mylar and PoGo created equally smooth surfaces, while significantly rougher surfaces were obtained after OptraPol and One Gloss applications. For Grandio, Mylar and PoGo created equally smooth surfaces, while OptraPol and One Gloss produced equally rougher surfaces. Tetric EvoCeram exhibited the roughest surface with OptraPol, while no significant differences were found between Premise and Ceram X. According to SEM images, OptraPol and One Gloss scratched and plucked the particles away from the surface, while PoGo created a uniform finish, although the roughness values were not the same for each composite.
Statement of the Problem:Many regions in the world do not have electricity, water, or access to dental facilities that allows the treatment of caries with dental handpieces and rotary burs. For restorative techniques used in these regions, an antibacterial self-adherent glass ionomer material would contribute considerably.Purpose: This study aimed to test if chlorhexidine diacetate (Fluka BioChemika, Buchs, Switzerland)-or chlorhexidine digluconate (Sigma-Aldrich, Steinheim, Germany)-added ChemFil Superior glass ionomer cement (Dentsply DeTrey, Konstanz, Germany) had any long-term antibacterial effect against certain oral bacteria and to test the new formulation's physical properties. Materials and Methods:ChemFil Superior was used as a control. Chlorhexidine diacetate (powder) was added to the powder and chlorhexidine digluconate (liquid) was mixed with the powder in order to obtain 0.5, 1.25, and 2.5% concentrations of the respective groups. Setting time, compressive strength, and acid erosion were tested according to ISO 9917-1. Working time, hardness, diametral tensile strength, and biaxial flexural strength were also determined. Longterm antimicrobial activity against S. mutans, L. acidophilus, and C. albicans were tested with the agar diffusion method. Analysis of variance (ANOVA) was used for comparison (p < 0.05).Results: Regarding the immediate antibacterial effect for S. mutans, all the tested groups showed inhibitions of the strain compared with the control group (p < 0.05), with larger zones for the higher concentration groups and all the diacetates. For L. acidophilus, all the groups were effective compared with the control, but the greatest antibacterial effect was observed with the 2.5% diacetate group. The 2.5% group of chlorhexidine diacetate showed antibacterial activity up to 90 days against S. mutans and up to 60 days against L. acidophilus. The working and setting time, acid erosion test, diametral tensile strength, and biaxial flexural strength of the tested © 2 0 0 8 , C O P
The color stability of nanocomposites depends on the material's properties, rather than the polishing systems used. Z Ergücü • LS Türkün • A Aladag SUMMARYObjective: This study compared the color changes of five novel resin composites polished with two one-step polishing systems when exposed to coffee solution.Methods: The resin composites tested were Filtek Supreme XT, Grandio, CeramX, Premise and Tetric EvoCeram. A total of 150 discs (30/resin composites, 10 x 2 mm) were fabricated. Ten specimens/resin composites cured under Mylar strips served as the control. The other samples were polished with PoGo and OptraPol discs for 30 seconds using a slow speed handpiece and immersed in coffee (Nescafé) for seven days. Color measurements were made with Vita Easyshade at baseline and after one and seven days. Repeated Measures ANOVA and Bonferroni tests were used for statistical analyses (p≤0.05).Results: The differences between the mean ΔE* values for the resin composites polished with two different one-step systems were statistically significant (p<0.05). After one week, all materials exhibited significant color changes compared to baseline. All Mylar finished specimens showed the most intense staining (p<0.05).There were no significant differences between the OptraPol and PoGo polished groups. Mylarfinished specimens of CeramX, Tetric EvoCeram, Premise and Filtek Supreme XT presented the greatest staining (p<0.05). For Grandio, there were no significant differences between the Mylar and PoGo groups, while the most stain resistant surfaces were attained with OptraPol.Conclusion: Removing the outermost resin layer by polishing procedures is essential to achieving a stain resistant, more esthetically stable surface. One-step polishing systems can be used successfully for polishing nanocomposites.
The results of this study suggest that the discoloration of resin veneers can be partially removed by in-office bleaching and repolishing procedures.
In spite of many improvements in chemical compositions and fillers of the contemporary resin composites, the color changes after polymerization were still perceptible in all the resin composites tested in this study, regardless of their types and brands. Such changes may cause esthetic problems clinically, thus should be taken into account when the shade selections are performed. Alternatively, a piece of unpolymerized resin material can be placed on, or adjacent to the tooth to be restored and polymerized to confirm the selected shade of the esthetic material.
SUMMARYObjective: This study investigated the radiopacity of six commercially available flowable composites by using a digital image analysis method to determine the mean gray values of the materials.Methods: The flowable resin composites evaluated in this study were Clearfil Majesty Flow, Estelite Flow Q, Tetric N Flow, Esthet X Flow, Filtek Supreme XT Flow and Gradia Direct LoFlo. Ten sample discs (6 x 1 mm) for each group were prepared and 1-mm thick slices were obtained from freshly-extracted teeth for the control group. The mean gray values (MGVs) of each specimen and aluminum (Al) stepwedge were measured by using the histogram function of a computer graphics program. Analysis of variance (ANOVA) was used to investigate the significance of the differences among the groups. For pairwise comparisons, the Tukey test was applied (α α=0.05). Results:The radiopacity values of Gradia Direct LoFlo, dentin and Estelite Flow Q were close to that of 1 mm Al. Tetric N Flow and Cl Majesty Flow were more radiopaque than enamel, whereas Filtek Supreme XT Flow had a similar radiopacity to enamel. Conclusion:The radiopacity of flowable composites varies considerably, and care must be taken when selecting an appropriate material to enable secondary caries detection under posterior composite restorations. INTRODUCTIONRadiopacity is an essential property for all restorative materials, 1 because adequate radiopacity allows the clinician to evaluate restoration integrity at subsequent Clinical RelevanceFlowable resin composites ranged in radiopacity from dentin equivalence to greater than that of enamel, making the product selection an important consideration for achieving adequate diagnostic contrast.
Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017).
The EquiaFil system was more successful than Riva SC regarding color match, marginal adaptation, anatomic form, and retention rate after a six-year clinical evaluation period.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.