No abstract

Resistive switching (RS) is an interesting property shown by some materials systems that, especially during the last decade, has gained a lot of interest for the fabrication of electronic devices, with electronic nonvolatile memories being those that have received the most attention. The presence and quality of the RS phenomenon in a materials system can be studied using different prototype cells, performing different experiments, displaying different figures of merit, and developing different computational analyses. Therefore, the real usefulness and impact of the findings presented in each study for the RS technology will be also different. This manuscript describes the most recommendable methodologies for the fabrication, characterization, and simulation of RS devices, as well as the proper methods to display the data obtained. The idea is to help the scientific community to evaluate the real usefulness and impact of an RS study for the development of RS technology.

The basic unit of information in filamentary-based resistive switching memories is physically stored in a conductive filament. Therefore, the overall performance of the device is indissolubly related to the properties of such filament. In this Letter, we report for the first time on the three-dimensional (3D) observation of the shape of the conductive filament. The observation of the filament is done in a nanoscale conductive-bridging device, which is programmed under real operative conditions. To obtain the 3D-information we developed a dedicated tomography technique based on conductive atomic force microscopy. The shape and size of the conductive filament are obtained in three-dimensions with nanometric resolution. The observed filament presents a conical shape with the narrow part close to the inert-electrode. On the basis of this shape, we conclude that the dynamic filament-growth is limited by the cation transport. In addition, we demonstrate the role of the programming current, which clearly influences the physical-volume of the induced conductive filaments.

No abstract

Filamentary-based oxide resistive memory is considered as a disruptive technology for nonvolatile data storage and reconfigurable logic. Currently accepted models explain the resistive switching in these devices through the presence/absence of a conductive filament (CF) that is described as a reversible nanosized valence-change in an oxide material. During device operation, the CF cycles billion of times at subnanosecond speed, using few tens of microamperes as operating current and thus determines the whole device’s performance. Despite its importance, the CF observation is hampered by the small filament size and its minimal compositional difference with the surrounding material. Here we show an experimental solution to this problem and provide the three-dimensional (3D) characterization of the CF in a scaled device. For this purpose we have recently developed a tomography technique which combines the high spatial resolution of scanning probe microscopy with subnanometer precision in material removal, leading to a true 3D-probing metrology concept. We locate and characterize in three-dimensions the nanometric volume of the conductive filament in state-of-the-art bipolar oxide-based devices. Our measurements demonstrate that the switching occurs through the formation of a single conductive filament. The filaments exhibit sizes below 10 nm and present a constriction near the oxygen-inert electrode. Finally, different atomic-size contacts are observed as a function of the programming current, providing evidence for the filament’s nature as a defects modulated quantum contact.

In this paper, we show the coexistence of the bipolar and unipolar resistive-switching modes in NiO cells realized using an optimized oxidation process of a Ni blanket layer used as the bottom electrode. The two switching modes can be activated independent of the cell switching history provided the appropriate programming conditions are applied. The bipolar and unipolar switching modes are discussed as driven by electrochemical- and thermal-based mechanisms, respectively. The switching versatility between these two modes is demonstrated both for large oxidized Ni films and for Ni films oxidized at the bottom of small dimension contact holes. The perspective of selecting the desired switching mode in a scaled device made in a small diameter single hole is highly attractive because the specific advantages of the two modes broaden the application scope of the cell and enable larger flexibility in terms of memory architecture.

In this letter, we study the influence of the Pt top-electrode thickness and of the chamber atmosphere during cell operation on the resistive switching of TiN\HfO2\Pt cells. The oxygen permeability of the Pt electrode directly in contact with the atmosphere significantly affects the resistive switching and the resistance states of the cell. The results provide strong experimental indications that the electroforming operation leads to oxygen-vacancy formation and that the subsequent reset operation relies on the available oxygen species in the filament neighborhood. Significant implications with respect to endurance and retention assessment of resistive-switching memory devices are discussed.

No abstract