Inspired by biointerfaces, such as the surfaces of lotus leaves and pitcher plants, researchers have developed innovative strategies for controlling surface wettability and transparency. In particular, great success has been achieved in obtaining low adhesion and high transmittance via the introduction of a liquid layer to form liquid-infused surfaces. Furthermore, smart surfaces that can change their surface properties according to external stimuli have recently attracted substantial interest. As some of the best-performing smart surface materials, slippery liquid-infused porous surfaces (SLIPSs), which are super-repellent, demonstrate the successful achievement of switchable adhesion and tunable transparency that can be controlled by a graded mechanical stimulus. However, despite considerable efforts, producing temperature-responsive, super-repellent surfaces at ambient temperature and pressure remains difficult because of the use of nonreactive lubricant oil as a building block in previously investigated repellent surfaces. Therefore, the present study focused on developing multifunctional materials that dynamically adapt to temperature changes. Here, we demonstrate temperature-activated solidifiable/liquid paraffin-infused porous surfaces (TA-SLIPSs) whose transparency and control of water droplet movement at room temperature can be simultaneously controlled. The solidification of the paraffin changes the surface morphology and the size of the light-transmission inhibitor in the lubricant layer; as a result, the control over the droplet movement and the light transmittance at different temperatures is dependent on the solidifiable/liquid paraffin mixing ratio. Further study of such temperature-responsive, multifunctional systems would be valuable for antifouling applications and the development of surfaces with tunable optical transparency for innovative medical applications, intelligent windows, and other devices.
Sophisticated material interfaces generated by natural life forms such as lotus leaves and Nepenthes pitcher plants have exceptional abilities to resolve challenges in wide areas of industry and medicine. The nano- and microstructures inspired by these natural materials can repel various liquids and form self-cleaning coatings. In particular, slippery liquid-infused surfaces are receiving remarkable interest as transparent, nonfouling, and antifrosting synthetic surfaces for solar cells and optical devices. Here we focus on the transparency of lubricant-infused texture on antireflective films fabricated by layer-by-layer self-assembly that decrease light scattering, which is important to maintain device properties. A slippery fluid-infused antireflective film composed of chitin nanofibers less than 50 nm in diameter prevented light scattering at the long-wavelength side by Rayleigh scattering to achieve 97.2% transmittance. Moreover, films composed of the same materials demonstrated three different morphologies: superhydrophilicity with antireflection, superhydrophobicity, and omniphobicity, mimicking the biological structures of moth eyes, lotus leaves, and pitcher plants, respectively. The effect of thermal changes on the ability of each film to prevent frost formation was investigated. The slippery fluid-infused antireflective film showed effective antifrosting behavior.
Antifouling super-repellent surfaces inspired by Nepenthes, the pitcher plant, were designed and named slippery liquid-infused porous surfaces (SLIPS). These surfaces repel various simple and complex liquids including water and blood by maintaining a low sliding angle. Previous studies have reported the development of fluorinated SLIPS that are not biocompatible. Here, we fabricated fluid-infused films composed of biodegradable materials and a biocompatible lubricant liquid. The film was constructed using a combination of electrostatic interactions between chitosan and alginate and hydrogen-bonding between alginate and polyvinylpyrrolidone (PVPON) via the layer-by-layer self-assembly method. After chitosan and alginate were cross-linked, the PVPON was removed by increasing the pH to generate porosity from the deconstruction of the hydrogen-bonding. The porous underlayer was hydrophobized and covered by biocompatible almond oil. Blood easily flowed over this biodegradable and biocompatible SLIPS without leaving stains on the surface, and the material is environmentally durable, has a high transmittance of about 90%, and is antithrombogenic. The results of this study suggest that this SLIPS may facilitate the creation of nonfouling medical devices through a low-cost, eco-friendly, and simple process.
We thank Mr. Junichiro Abe for the fabrication of electric circuits for the automatic spray-LBL system. We also thank Prof. Michael Rubner of MIT for useful discussions.
Bioinspired photonic crystals that can be used to precisely control the optical reflection of light of a specific wavelength by varying their thickness and refractive index have attracted much attention. Among them, photonic crystals that can reflect near-infrared light have attracted attention owing to their potential applications including window coating with heat-shielding property. However, photonic crystals with an optical function in practical use sometimes lose their function because of contamination. Here, a near-infrared reflection coating film with self-healing omniphobicity was designed and prepared by layer-by-layer assembly and an instant liquid phase omniphobization method. The fabricated films had a self-cleaning thermal shielding effect. The films were visually transparent and could be used to control the reflection peak of the near-infrared light (range of 700-1000 nm) by adjusting the film thickness, which prevented the increase in temperature in enclosed spaces. After omniphobization, the films had self-cleaning properties of their surface and retained their optical properties. These functions are promising for practical application on windows as heat-shielding.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.