Large-scale and highly ordered 3D perov-skite nanowire (NW) arrays are achieved in nanoengineering templates by a unique vapor-solid-solid reaction process. The excellent material properties, in conjunction with the high integration density of the NW arrays, make them promising for 3D integrated nanoelectronics/optoelectronics. Image sensors with 1024 pixels are assembled and characterized to demonstrate the technological potency.

Flexible thin film solar cells have attracted a great deal of attention as mobile power sources and key components for building-integrated photovoltaics, due to their light weight and flexible features in addition to compatibility with low-cost roll-to-roll fabrication processes. Among many thin film materials, organometallic perovskite materials are emerging as highly promising candidates for high efficiency thin film photovoltaics; however, the performance, scalability, and reliability of the flexible perovskite solar cells still have large room to improve. Herein, we report highly efficient, flexible perovskite solar cells fabricated on ultrathin flexible glasses. In such a device structure, the flexible glass substrate is highly transparent and robust, with low thermal expansion coefficient, and perovskite thin film was deposited with a thermal evaporation method that showed large-scale uniformity. In addition, a nanocone array antireflection film was attached to the front side of the glass substrate in order to improve the optical transmittance and to achieve a water-repelling effect at the same time. It was found that the fabricated solar cells have reasonable bendability, with 96% of the initial value remaining after 200 bending cycles, and the power conversion efficiency was improved from 12.06 to 13.14% by using the antireflection film, which also demonstrated excellent superhydrophobicity.

Photoelectrochemical (PEC) solar water splitting represents a clean and sustainable approach for hydrogen (H2) production and substantial research are being performed to improve the conversion efficiency. Hematite (α-Fe2O3) is considered as a promising candidate for PEC water splitting due to its chemical stability, appropriate band structure, and abundance. However, PEC performance based on hematite is hindered by the short hole diffusion length that put a constraint on the active layer thickness and its light absorption capability. In this work, we have designed and fabricated novel PEC device structure with ultrathin hematite film deposited on three-dimensional nanophotonic structure. In this fashion, the nanophotonic structures can largely improve the light absorption in the ultrathin active materials. In addition, they also provide large surface area to accommodate the slow surface water oxidation process. As the result, high current density of 3.05 mA cm(-2) at 1.23 V with respect to the reversible hydrogen electrode (RHE) has been achieved on such nanophotonic structure, which is about three times of that for a planar photoelectrode. More importantly, our systematic analysis with experiments and modeling revealed that the design of high performance PEC devices needs to consider not only total optical absorption, but also the absorption profile in the active material, in addition to electrode surface area and carrier collection.