No abstract

No abstract

No abstract

The hyperbolic frequency-modulated (HFM) waveform has an inherent Doppler-invariant property. It is more conducive than the conventional linear frequency-modulated (LFM) waveform to high speed moving target imaging. In order to apply the HFM waveform to existing inverse synthetic aperture radar (ISAR) imaging systems, a new pulse compression algorithm is proposed. First, the received HFM echoes are demodulated with the transmitted signal, which is called “decurve” in this paper. By this operation, the bandwidth of the demodulated echoes is effectively reduced and can be processed by the existing narrow-band receiver. Then, the phase of the decurved HFM echoes is analyzed, and thus, the pulse compression is accomplished by space-variant phase compensation. In addition, the space-variant phase compensation is realized by resampling and fast Fourier transform (FFT) with high computational efficiency. Finally, numerical results illustrate the effectiveness of the proposed method.

Combining Frequency Modulation Continuous Wave (FMCW) and Inverse Synthetic Aperture Radar (ISAR), FMCW-ISAR is more practical with low cost, low power, small volume for short distance targets. However, the continuous echo signals in FMCW-ISAR system lead to dechirp distortion phenomenon during the process of dechirp for far-distance targets, especially for the space targets. In this paper, a signal model is proposed to study the image processing of space targets in FMCW-ISAR system. The effects of dechirp distortion which can be ignored for shortdistance targets are analyzing for the first time. Double images of a target appear after imaging because of the distortion which decreases the resolution. A method is proposed to correct the distortion by translating the current received signal according to the acquired reference distance. The simulation results validate the theoretical analysis conclusions and the effectiveness of the proposed method for the distortion correction.

No abstract

No abstract

Accurate and rapid detection of tea shoots within the tea canopy is essential for achieving the automatic picking of famous tea. The current detection models suffer from two main issues: low inference speed and difficulty in deployment on movable platforms, which constrain the development of intelligent tea picking equipment. Furthermore, the detection of tea canopy shoots is currently limited to natural daylight conditions, with no reported studies on detecting tea shoots under artificial light during the nighttime. Developing an all-day tea picking platform would significantly improve the efficiency of tea picking. In view of these problems, the research objective was to propose an all-day lightweight detection model for tea canopy shoots (TS-YOLO) based on YOLOv4. Firstly, image datasets of tea canopy shoots sample were collected under low light (6:30–7:30 and 18:30–19:30), medium light (8:00–9:00 and 17:00–18:00), high light (11:00–15:00), and artificial light at night. Then, the feature extraction network of YOLOv4 and the standard convolution of the entire network were replaced with the lightweight neural network MobilenetV3 and the depth-wise separable convolution. Finally, to compensate for the lack of feature extraction ability in the lightweight neural network, a deformable convolutional layer and coordinate attention modules were added to the network. The results showed that the improved model size was 11.78 M, 18.30% of that of YOLOv4, and the detection speed was improved by 11.68 FPS. The detection accuracy, recall, and AP of tea canopy shoots under different light conditions were 85.35%, 78.42%, and 82.12%, respectively, which were 1.08%, 12.52%, and 8.20% higher than MobileNetV3-YOLOv4, respectively. The developed lightweight model could effectively and rapidly detect tea canopy shoots under all-day light conditions, which provides the potential to develop an all-day intelligent tea picking platform.