Miniaturized atmospheric pressure glow discharges (APGDs) were generated in contact with small sized flowing liquid cathode systems. As anodes a solid pin electrode or a miniature flow Ar microjet were applied. Both discharge systems were operated in the open to air atmosphere. Hydrogen peroxide (H 2 O 2) as well as ammonium (NH 4 ?), nitrate (NO 3-), and nitrite (NO 2-) ions were quantified in solutions treated by studied discharge systems. Additionally, an increase in the acidification of these solutions was noted in each case. Emission spectra of the near cathode zone of both systems were measured in order to elucidate mechanisms that lead to the formation of active species in gas and liquid phases of the discharge. Additionally, the concentration of active species in the liquid phase (H 2 O 2 , NH 4 ? , NO 3 and NO 2-) was monitored as a function of the solution uptake rate and the flow rate of Ar. The suitability of investigated discharge systems in the water treatment was tested on artificial wastewaters containing an organic dye (methyl red), hardly removable by classical methods non-ionic surfactants (light Triton x-45 and heavy Triton x-405) and very toxic Cr(VI) ions. Preliminary results presented here indicate that both investigated flow-through APGD systems may successfully be applied for the efficient and fast on-line continuous flow chemical degradation of toxic and hazardous organic and inorganic species in wastewater solutions. Keywords Atmospheric pressure glow discharge Á Degradation of hazardous chemicals Á Plasma water treatment processes Á Plasma-liquid interaction

No abstract

No abstract

A novel atmospheric pressure glow discharge generated in contact with a flowing liquid anode (FLA-APGD) was developed as the efficient excitation source for the optical emission spectrometry (OES) detection. Differences in the appearance and the electrical characteristic of the FLA-APGD and a conventional system operated with a flowing liquid cathode (FLC-APGD) were studied in detail and discussed. Under the optimal operating conditions for the FLA-APGD, the emission from the analytes (Ag, Cd, Hg, Pb, Tl, and Zn) was from 20 to 120 times higher as compared to the FLC-APGD. Limits of detections (LODs) established with a novel FLA-APGD system were on average 20 times better than those obtained for the FLC-APGD. A further improvement of the LODs was achieved by reducing the background shift interferences and, as a result, the LODs for Ag, Cd, Hg, Pb, Tl, and Zn were 0.004, 0.040, 0.70, 1.7, 0.035, and 0.45 μg L(-1), respectively. The precision of the FLA-APGD-OES method was evaluated to be within 2-5% (as the relative standard deviation of the repeated measurements). The method found its application in the determination of the content of Ag, Cd, Hg, Pb, Tl, and Zn in a certified reference material (CRM) of Lobster hepatopancreas (TORT-2), four brass samples as well as mineral water and tea leaves samples spiked with the analytes. In the case of brass samples, a reference method, i.e., inductively coupled plasma optical emission spectrometry (ICP-OES) was used. A good agreement between the results obtained with FLA-APGD-OES and the certified values for the CRM TORT-2 as well as the reference values obtained with ICP-OES for the brass samples was revealed, indicating the good accuracy of the proposed method. The recoveries obtained for the spiked samples of mineral water and tea leaves were within the range of 97.5-102%.

A direct current atmospheric pressure glow discharge operated between a pin-type solid metallic electrode and the surface of a flowing solution, positively or negatively charged and serving as the flowing liquid anode or cathode, was used for synthesizing gold nanoparticles.