CoCrMo is a biomedical grade alloy which is widely used in the manufacturing of orthopaedic implants such as hip and knee replacement joints because of it has high hardness, high corrosion resistance, and excellent biocompatibility. However, the release of metal ions due to corrosion and wear of the alloy over time may cause allergic or other adverse reactions in some patients. To date, various surface modification techniques including nitriding, have been used to improve the performance of CoCrMo (F75) alloy.15 m 3 N -1 m -1 (-1100 V), which were one order of magnitude lower than the untreated substrate, Kc = 6 ×10 -14 m 3 N -1 m -1 . The Knoop microhardness (HK) of nitrided samples significantly increased by a factor of 5 (HK= 2750 at -1100 V) as compared to the untreated substrate, HK=525, demonstrating the high efficiency of the process. The samples nitrided at -700 V and -900 V exhibited enhanced corrosion resistance as compared to untreated alloy by avoiding the formation of CrN based compounds which adversely affect the corrosion performance.
This study describes the performance of nanoscale multilayer TiN/NbN coatings deposited on CoCrMo medical-grade alloys by utilising novel mixed high power impulse magnetron sputtering (HIPIMS) and direct current unbalanced magnetron sputtering (UBM) technique in an industrial size vacuum coater. Scanning electron microscopy analysis showed that these coatings were extremely dense without any intercolumnar voids. The coating exhibited high hardness of 28 GPa, as well as low friction and wear coefficient of 0.7 and 1.4 × 10−14 m3·N−1·m−1, respectively, as compared to the bare material. Scratch tests revealed superior coating to substrate adhesion due to the HIPIMS etching prior to coating deposition. Energy-dispersive X-ray analysis of the wear debris generated during the impact test together with focused ion beam cross-section analysis in different locations of the impact crater revealed the coating failure mechanism and further confirmed the excellent coating to substrate bonding strength. Potentiodynamic polarisation tests in NaCl and Hank’s solutions revealed the clear passivation behaviour, several orders of magnitude lower corrosion currents, and high pitting potentials of the coating, which guarantee excellent protection to the base alloy in such aggressive environments. Inductively coupled plasma mass spectrometry analysis of Hank’s solution containing corrosion debris of the coated sample revealed that the leaching of harmful metal ions from the base material was reduced to below the detection limit of the technique, thus demonstrating the high barrier properties of the coating.
Growth of polycrystalline CdMnTe ternary compound thin films has been carried out using cathodic electrodeposition technique at different cathodic potentials. The range of the cathodic potentials used in this work has been chosen according to the cyclic voltammogram results. The CdMnTe thin films were electroplated from electrolyte containing CdSO4, TeO2 and MnSO4 in an acidic aqueous medium. Glass/fluorine-doped tin oxide (FTO) substrates have been used to electrodeposit the semiconductor layers. The structural, compositional, morphological, optical and electrical properties of the CdMnTe thin films were studied using X-ray diffraction (XRD), Sputtered neutral-mass spectroscopy (SNMS), Scanning electron microscopy (SEM), UV–Vis spectroscopy and Photo-electro-chemical (PEC) cell measurements respectively. The primarily grown as-deposited (AD) layers went through two different post-growth surface treatment conditions- heat-treated in air in the presence of CdCl2 (CCT) and heat-treated in air in the presence of GaCl3 (GCT). Results from the XRD indicated the polycrystalline nature of the electrodeposited films. The electroplated films have cubic crystal structures and the preferred orientation was found to be along the (111) plane of CdMnTe. Inclusion of Mn has been qualitatively observed using SNMS measurement. The optical energy bandgaps of the thin films were found to be varying between ~ 1.90 and ~ 2.20 eV. Though all the layers after post-treatment showed p-type electrical conduction, both p and n-type conductivity were obtained at different cathodic potentials for as-deposited materials. Comparison of the deposited layers to other electrodeposited ternary compounds has also been discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.