The propagation properties and resonance characteristics of leaky surface acoustic waves (LSAWs) and longitudinal-type LSAWs (LLSAWs) on a LiTaO3 (LT) thin plate bonded to an AT-cut quartz substrate were investigated experimentally. For the LSAWs and LLSAWs, the bonded structures of 36°Y-cut X-propagating LT (36°YX-LT)/AT-cut 90°X-propagating quartz (AT90°X-quartz) and X-cut 31°Y-propagating LT (X31°Y-LT)/AT-cut 45°X-propagating quartz (AT45°X-quartz) were fabricated, respectively. For the LSAW on 36°YX-LT/AT90°X-quartz, the electromechanical coupling factor (K2) of 11.1% was obtained at an LT thin-plate thickness of 0.25 wavelength, whereas K2 for a single LT substrate was measured to be 5.7%. For the LLSAW on X31°Y-LT/AT45°X-quartz, K2 increased from 2.8% for the single LT substrate to 7.2% at an LT thin-plate thickness of 0.14 wavelength. Furthermore, K2 of approximately 12% and the temperature coefficient of frequency (TCF) of 0 ppm/°C were theoretically obtained simultaneously for the LSAW on 36°YX-LT/AT-cut 90°X-quartz at a certain thin-plate thickness.

To obtain a bonded structure with low attenuation for longitudinal leaky surface acoustic waves (LLSAWs), the propagation and resonance properties on a LiTaO3 (LT) or LiNbO3 thin plate bonded to an X-cut quartz substrate were theoretically analyzed. The attenuation of an X-cut 31°Y-propagating LT (X31°Y-LT)/X32°Y-quartz (X32°Y-Q) was calculated to be 0.0005 dB/λ at the normalized LT thin plate thickness h/λ = 0.062 (λ: wavelength) and was lower than that on an X31°Y-LT/AT45°X-Q. Using a finite element method, for the X31°Y-LT/X32°Y-Q, the admittance ratio and Q factor were improved to 120 dB and 53 400 from 62 dB and 1000 for the X31°Y-LT/AT45°X-Q, respectively. Then, the propagation and resonance properties were measured. For the X31°Y-LT/X32°Y-Q, the measured electromechanical coupling factor (K2) and Q factor increased to 5.6% and 280 from 1.8% and 32 for the single LT, respectively. The temperature coefficient of frequency of the LLSAW was measured to be −26.2 ppm °C−1.

No abstract

Graphical solutions and experimental results of the blocking oscillation of the guided-wave optical bistable devices using dc drift phenomena of LiNbO3 are reported. The frequency of the oscillation can be varied in the range from 0.1 to 100 Hz by changing biasing voltage and input light level.