On-chip contention increases memory access latency for multicore processors. We identify that this additional latency has a substantial efect on performance for an important class of latency-critical memory operations: those that result in a cache miss and are dependent on data from a prior cache miss. We observe that the number of instructions between the frst cache miss and its dependent cache miss is usually small. To minimize dependent cache miss latency, we propose adding just enough functionality to dynamically identify these instructions at the core and migrate them to the memory controller for execution as soon as source data arrives from DRAM. This migration allows memory requests issued by our new Enhanced Memory Controller (EMC) to experience a 20% lower latency than if issued by the core. On a set of memory intensive quad-core workloads, the EMC results in a 13% improvement in system performance and a 5% reduction in energy consumption over a system with a Global History Bufer prefetcher, the highest performing prefetcher in our evaluation.

Extracting high performance from Chip Multiprocessors requires that the application be parallelized. A common software technique to parallelize loops is pipeline parallelism in which the programmer/compiler splits each loop iteration into stages and each stage runs on a certain number of cores. It is important to choose the number of cores for each stage carefully because the core-to-stage allocation determines performance and power consumption. Finding the best core-to-stage allocation for an application is challenging because the number of possible allocations is large, and the best allocation depends on the input set and machine configuration.This paper proposes Feedback-Directed Pipelining (FDP), a software framework that chooses the core-to-stage allocation at run-time. FDP first maximizes the performance of the workload and then saves power by reducing the number of active cores, without impacting performance. Our evaluation on a real SMP system with two Core2Quad processors (8 cores) shows that FDP provides an average speedup of 4.2x which is significantly higher than the 2.3x speedup obtained with a practical profile-based allocation. We also show that FDP is robust to changes in machine configuration and input set.

Abstract

Abstract-Cache memories have traditionally been designed to exploit spatial locality by fetching entire cache lines from memory upon a miss. However, recent studies have shown that often the number of sub-blocks within a line that are actually used is low. Furthermore, those sub-blocks that are used are accessed only a few times before becoming dead (i.e., never accessed again). This results in considerable energy waste since 1) data not needed by the processor is brought into the cache, and 2) data is kept alive in the cache longer than necessary.We propose the Dead Sub-Block Predictor (DSBP) to predict which sub-blocks of a cache line will be actually used and how many times it will be used in order to bring into the cache only those sub-blocks that are necessary, and power them off after they are touched the predicted number of times. We also use DSBP to identify dead lines (i.e., all sub-blocks off) and augment the existing replacement policy by prioritizing dead lines for eviction. Our results show a 24% energy reduction for the whole cache hierarchy when averaged over the SPEC2000, SPEC2006 and NAS-NPB benchmarks.

Previous research has shown that Staged Execution (SE), i.e., dividing a program into segments and executing each segment at the core that has the data and/or functionality to best run that segment, can improve performance and save power. However, SE's benefit is limited because most segments access inter-segment data, i.e., data generated by the previous segment. When consecutive segments run on different cores, accesses to inter-segment data incur cache misses, thereby reducing performance. This paper proposes Data Marshaling (DM), a new technique to eliminate cache misses to inter-segment data. DM uses profiling to identify instructions that generate inter-segment data, and adds only 96 bytes/core of storage overhead. We show that DM significantly improves the performance of two promising Staged Execution models, Accelerated Critical Sections and producer-consumer pipeline parallelism, on both homogeneous and heterogeneous multi-core systems. In both models, DM can achieve almost all of the potential of ideally eliminating cache misses to inter-segment data. DM's performance benefit increases with the number of cores.

No abstract

Previous research has shown that Staged Execution (SE), i.e., dividing a program into segments and executing each segment at the core that has the data and/or functionality to best run that segment, can improve performance and save power. However, SE's benefit is limited because most segments access inter-segment data, i.e., data generated by the previous segment. When consecutive segments run on different cores, accesses to inter-segment data incur cache misses, thereby reducing performance. This paper proposes Data Marshaling (DM), a new technique to eliminate cache misses to inter-segment data. DM uses profiling to identify instructions that generate inter-segment data, and adds only 96 bytes/core of storage overhead. We show that DM significantly improves the performance of two promising Staged Execution models, Accelerated Critical Sections and producer-consumer pipeline parallelism, on both homogeneous and heterogeneous multi-core systems. In both models, DM can achieve almost all of the potential of ideally eliminating cache misses to inter-segment data. DM's performance benefit increases with the number of cores.