Developing a rapid and reliable method for measuring the photoreactivity of TiO2 pigments is of great importance for industrial application. The photoactivity of industrial TiO2 pigments were evaluated via the photodegradation of a model azo dye, methyl orange (MO), in the present work. The TiO2 pigments were characterized by Fourier-transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–vis) spectroscopy, scanning electron microscopy (SEM), and photoluminescence (PL) spectroscopy. The photoactivity test results showed that the anatase TiO2 pigment was responsible for accelerating MO degradation, while the rutile pigment acted as a stabilizer, and effective UV absorber retarded the photodegradation of MO. It was found that the photodegradation of MO was driven mainly by photoholes (h+) and hydroxyl radicals (•OH), in the presence of TiO2 pigment with high photoactivity. With the help of the degradation intermediates during the photodegradation process and the calculated data, the preliminary degradation mechanism including azo bond cleaving, h+ oxidation, and hydroxylated products’ generation for MO was also elucidated. The photoactivity of TiO2 pigments can be rapidly evaluated in this work, which would be an efficient approach for assessing the product quality control and the end-use performance of TiO2 pigments.
The titania nanotubes-bonded sulfamic acid (TNTs-NHSO3H) catalyst was designed and successfully fabricated by the post-synthesis modification method. The as-prepared catalyst was characterized by a variety of characterization techniques, including Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and thermogravimetry-differential thermal gravimetry (TG-DTG). The crystal structure of the TNTs still maintained during the modification process. Although the BET surface area was decreased, the amount of Brønsted acid sites can be efficiently fabricated on the TNTs. The catalytic activity of TNTs-NHSO3H was examined for the synthesis of n-butyl levulinate (BL) from levulinic acid (LA) and furfuryl alcohol (FA). A relatively high selectivity (99.6%) at 99.3% LA conversion was achieved for esterification of levulinic acid owing to the strong Brønsted acidity sites. And also, the TNTs-NHSO3H catalyst exhibited a higher reactivity for alcoholysis of FA and the yield of BL reached 90.4% with 100% FA conversion was obtained under the mild conditions.
The development of efficient heterogeneous catalytic system to convert plentiful biomass to renewable bio-chemicals is urgent need. Titanate nanotubes-based materials obtained from hydrothermal treatment have been reported as low-cost and efficient catalytic materials in chemical syntheses for bio-based chemicals production with interesting catalytic performance. This mini-review expressly revealed the significance and potential of using titanate nanotubes based material as sustainable and environmentally benign solid catalysts/supports for synthesis of various bio-based chemicals, including glycerol-derived solketal, jet fuel range alkanes precursors, biomass-derived esters, aldehydes, aromatic compounds and so on. From the current knowledge on titanate nanotubes-based material via hydrothermal method here summarized, the future lines of research in the field of catalysis/supports for bio-based chemicals production are outlined.
Levulinic esters, synthesized by the esterification of biomass-derived levulinic acid with various alcohols, is an important chemical that plays an essential role in the fields of biomass fuel additives, organic synthesis, and high value-added products. In the present work, the catalytic esterification of levulinic acid with n-butyl alcohol was selected as a typical model reaction to investigate the catalytic performance of an inexpensive commercial catalyst, titanium oxide nanoparticles. The influences of reaction time, reaction temperature, and catalyst loading on the conversion of levulinic acid to n-butyl levulinate were systematically examined through single-factor experiments. Additionally, the optimization of the reaction conditions was further investigated by a Box–Behnken design in response to the surface methodology. The desired product, n-butyl levulinate, with a good yield (77.6%) was achieved under the optimal conditions (reaction time of 8 h, reaction temperature of 120 °C, and catalyst dosage of 8.6 wt.%) when using titanium oxide nanoparticles as catalysts. Furthermore, it was found that addition of water to the catalytic system facilitated the reaction process, to some extent. This study reveals that the nanosized TiO2 material, as an efficient solid acid catalyst, had good catalytic performance and stability for the esterification of levulinic acid after six consecutive uses.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.