Two-dimensional covalent organic frameworks (2D COFs) are ideally suited for organizing redox-active subunits into periodic, permanently porous polymer networks of interest for pseudocapacitive energy storage. Here we describe a method for synthesizing crystalline, oriented thin films of a redox-active 2D COF on Au working electrodes. The thickness of the COF film was controlled by varying the initial monomer concentration. A large percentage (80-99%) of the anthraquinone groups are electrochemically accessible in films thinner than 200 nm, an order of magnitude improvement over the same COF prepared as a randomly oriented microcrystalline powder. As a result, electrodes functionalized with oriented COF films exhibit a 400% increase in capacitance scaled to electrode area as compared to those functionalized with the randomly oriented COF powder. These results demonstrate the promise of redox-active COFs for electrical energy storage and highlight the importance of controlling morphology for optimal performance.
Versatile and readily available battery materials compatible with a range of electrode configurations and cell designs are desirable for renewable energy storage. Here we report a promising class of materials based on redox active colloids (RACs) that are inherently modular in their design and overcome challenges faced by small-molecule organic materials for battery applications, such as crossover and chemical/morphological stability. RACs are cross-linked polymer spheres, synthesized with uniform diameters between 80 and 800 nm, and exhibit reversible redox activity as single particles, as monolayer films, and in the form of flowable dispersions. Viologen-based RACs display reversible cycling, accessing up to 99% of their capacity and 99 ± 1% Coulombic efficiency over 50 cycles by bulk electrolysis owing to efficient, long-distance intraparticle charge transfer. Ferrocene-based RACs paired with viologen-based RACs cycled efficiently in a nonaqueous redox flow battery employing a simple size-selective separator, thus demonstrating a possible application that benefits from their colloidal dimensions. The unprecedented versatility in RAC synthetic and electrochemical design opens new avenues for energy storage.
Porous polymer networks (PPNs) are attractive materials for capacitive energy storage because they offer high surface areas for increased double-layer capacitance, open structures for rapid ion transport, and redox-active moieties that enable faradaic (pseudocapacitive) energy storage. Here we demonstrate a new attractive feature of PPNs--the ability of their reduced forms (radical anions and dianions) to interact with small radii cations through synergistic interactions arising from densely packed redox-active groups, only when prepared as thin films. When naphthalene diimides (NDIs) are incorporated into PPN films, the carbonyl groups of adjacent, electrochemically generated, NDI radical anions and dianions bind strongly to K(+), Li(+), and Mg(2+), shifting the formal potentials of NDI's second reduction by 120 and 460 mV for K(+) and Li(+)-based electrolytes, respectively. In the case of Mg(2+), NDI's two redox waves coalesce into a single two-electron process with shifts of 240 and 710 mV, for the first and second reductions, respectively, increasing the energy density by over 20 % without changing the polymer backbone. In contrast, the formal reduction potentials of NDI derivatives in solution are identical for each electrolyte, and this effect has not been reported for NDI previously. This study illustrates the profound influence of the solid-state structure of a polymer on its electrochemical response, which does not simply reflect the solution-phase redox behavior of its monomers.
One of the major challenges in electrochemical energy storage (EES) is increasing the gravimetric capacity and energy density of the cathode material. Here we demonstrate how to increase the gravimetric energy density of electrical energy storage devices based on the use of organic materials through exploitation of the strong ionic coupling between a reduced carbonyl functionality and small cations such as lithium (Li(+)) and magnesium (Mg(2+)). Binding of the cation to the reduced carbonyl results in a positive shift of the formal reduction potential of the carbonyl couple. This has the effect of increasing the cell voltage which, in turn, results in an increase in the energy density. We show how this interaction can be used to dramatically increase, by up to a factor of 2, the energy density for a selected case study using 1,2-di(thiophen-2-yl)ethane-1,2-dione (DTED). We have carried out electrochemical and computational studies in order to understand the thermodynamic (positive shift of 250 mV and 1 V in the formal potential for the first and second reductions, respectively, of the carbonyl groups of DTED) and kinetic effects between small radii cations (Li(+) and Mg(2+)) and the reduced carbonyl functionality of carbonyl-based organic molecules (C-bOMs).
Organic compounds represent an attractive choice for cathode materials in rechargeable lithium batteries. Among all the organic functionalities, carbonyl-based organic molecules (C-bOMs) exhibit rapid and generally chemically reversible electrochemical behavior, and their reduced forms (enolates) can have strong ionic interactions with small radii cations (such as Li + ). Furthermore, a wide range of chemical variations/modifications can be performed on C-bOM structures via synthesis. We have systematically investigated how to modify their electrochemical behavior by shifting the formal potential, maximizing the interaction of the various redox forms with lithium ions, and maximizing the number of electrons transferred while minimizing the molecular weight of the compound, thus maximizing their gravimetric energy density. We have performed density-functional calculations to predict the formal potentials of the C-bOMs materials (E = 2.0−4.0 V) and identify the most promising candidates. We have determined how the addition of electron-withdrawing and -donating groups can be used to tune the formal potentials and lithium ion binding energies. Moreover, by using the LUMO energy levels and the aromaticity, which was calculated with nuclear independent chemical shift (NICS), it was possible to study the stability of these systems. Furthermore, we have been able to design and computationally characterize new C-bOMs molecules, which represent new potentially high gravimetric energy density cathode materials for electrical energy storage applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.