Two-dimensional covalent organic frameworks (2D COFs) are ideally suited for organizing redox-active subunits into periodic, permanently porous polymer networks of interest for pseudocapacitive energy storage. Here we describe a method for synthesizing crystalline, oriented thin films of a redox-active 2D COF on Au working electrodes. The thickness of the COF film was controlled by varying the initial monomer concentration. A large percentage (80-99%) of the anthraquinone groups are electrochemically accessible in films thinner than 200 nm, an order of magnitude improvement over the same COF prepared as a randomly oriented microcrystalline powder. As a result, electrodes functionalized with oriented COF films exhibit a 400% increase in capacitance scaled to electrode area as compared to those functionalized with the randomly oriented COF powder. These results demonstrate the promise of redox-active COFs for electrical energy storage and highlight the importance of controlling morphology for optimal performance.

Multifunctional three-dimensional (3-D) nano-architectures, integrating all device components within tens of nanometers, offer great promise for next generation electrical energy storage applications, but have remained challenging to achieve. The lack of appropriate synthesis methods, enabling precise 3-D spatial control at the nanoscale, remains a key issue holding back the development of such intricate architectures. Here we present an approach to such systems based on the bottom-up synthesis of penta-continuous nanohybrid monoliths with four functional components integrated in a triblock terpolymer derived core-shell double gyroid architecture. Two distinct 3-D interpenetrating networks serving as cathode and current collector are separated from a carbon anode matrix by continuous, ultrathin polymer electrolyte shells. All periodically ordered domains are less than 20 nm in their layer dimensions and integrated throughout the macroscopic monolith. Initial electrochemical measurements with the Li-ion/S system exhibit reversible batterylike charge-discharge characteristics with orders of magnitude decreases in footprint area over conventional flat thin layer designs.Nanostructured materials have dramatically impacted fundamental and applied research as well as applications due to their unique properties arising from well-defined spatial confinement and large surface area-to-volume ratios 1-3 . Co-continuous nanohybrids of multiple distinct functional materials offer the potential for great advances in catalysis, energy conversion, and optical devices due to their large interfacial areas combined with three-dimensional (3-D) continuity of all phases 4-6 . While developments in top-down photolithographic techniques and materials have enabled access to ever decreasing feature sizes in two-and three-dimensional (2-D and 3-D) architectures for transistors and other circuit elements 7,8 , leading to widespread deployment of electronics 9 , rapid 3-D nanohybrid device formation remains challenging and

Recent developments in polyester synthesis have established several systems based on zinc, chromium, cobalt, and aluminum catalysts for the ring-opening alternating copolymerization of epoxides with cyclic anhydrides. However, to date, regioselective processes for this copolymerization have remained relatively unexplored. Herein we report the development of a highly active, regioselective system for the copolymerization of a variety of terminal epoxides and cyclic anhydrides. Unexpectedly, electron withdrawing substituents on the salen framework resulted in a more redox stable Co(III) species and longer catalyst lifetime. Using enantiopure propylene oxide, we synthesized semicrystalline polyesters via the copolymerization of a range of epoxide/anhydride monomer pairs.