RESUMOA nanotecnologia é uma área do conhecimento que começou a ser explorada neste século e apresenta receptividade em vários segmentos industriais devido às propriedades distintas das nanopartículas e melhorias que elas proporcionam a materiais. Apesar disso, algo pouco explorado são as propriedades nocivas que estas podem exercer sobre os seres vivos. Por exemplo, as nanopartículas de prata (nAg) apresentam propriedades bactericidas e vem sendo utilizadas para aplicação em roupas, cateteres, recheios de filtros e etc. Este trabalho teve como objetivo a síntese e a caracterização de nAg obtidas por diferentes rotas sintéticas estabelecidas pela literatura. As nAgs obtidas foram caracterizadas através da espectroscopia de absorção no UV-vis e pela técnica de espalhamento de luz dinâmico (DLS). As partículas obtidas nas reações A, B, C e D apresentaram diâmetro médio entre 10 a 14 nm uma vez que todas absorvem nos comprimentos de onda entre 395 a 405nm. O tamanho real médio das partículas das reações B e E, obtido através do método DLS, foi de 10,82 nm para a reação B e 2,58 nm para a reação E.
RESUMOEste trabalho consistiu na avaliação do desempenho da cinza de eucalipto residual de caldeira na remoção de corante azul reativo 5G. Tratamentos químicos foram realizados no adsorvente visando aumentar sua capacidade de adsorção, pelos quais obteve-se uma melhoria de aproximadamente 50% pelo tratamento com H2O2 5% (v/v). Na avaliação dos parâmetros operacionais sobre o processo adsortivo como: pH, temperatura de adsorção, tempo, e velocidade de agitação empregou-se um delineamento composto central rotacional (DCCR). Por meio do planejamento experimental obtiveram-se as melhores condições operacionais utilizando-se a metodologia de superfície de resposta: pH 2,0, temperatura de 30°C e velocidade de agitação de 150 rpm. Na avaliação da cinética do processo, obteve-se um tempo de equilíbrio de aproximadamente 24 horas, sendo que o modelo de pseudo-segunda ordem melhor se ajustou aos dados experimentais. Além disso, avaliou-se a possibilidade de difusão intrapartícula pelo modelo de Weber e Morris, no qual verificou-se que a etapa de transferência de massa que controla o processo é a adsorção nos sítios. Finalmente, a isoterma de Langmuir representou os dados de equilíbrio adequadamente, apresentando uma capacidade máxima de adsorção de 46,6 mg g -1 e um coeficiente de afinidade 0,0245 L mg -1 . Os resultados obtidos no estudo sugerem que a cinza possui potencial para emprego como material adsorvente na remoção de efluentes contendo corantes têxteis em solução.
RESUMOOs corantes estão presentes em altas concentrações no efluente têxtil e boa parte é descarregada em corpos hídricos devido a sua baixa biodegradabilidade e alta solubilidade. Desta forma, o efluente têxtil precisa ser tratado antes de despeja-lo no meio ambiente e o processo de adsorção pode ser um método eficiente, de fácil operação e de baixo custo, principalmente, se o adsorvente utilizado for subproduto industrial. Neste sentido, este trabalho tem como objetivo a obtenção da cinética e o equilíbrio de adsorção do corante reativo azul 5G (RB5G) utilizando escamas de peixe do gênero tilápia como adsorvente. Os experimentos de adsorção foram realizados em sistema fechado e batelada, em pH 2 e temperatura de 25ºC. Os dados de equilíbrio de adsorção foram modelados a partir da isoterma de Langmuir e foi obtida uma capacidade máxima de adsorção de 272,39 mg/g. Os dados da cinética de adsorção foram obtidos nas concentrações iniciais de RB5G de 25, 50, 100, 150 e 200 mg L -1 , respectivamente e o tempo de equilíbrio alcançado foi de 72 horas. A cinética de adsorção foi descrita pelo modelo de adsorção-dessorção de Langmuir, o qual se ajustou bem aos dados experimentais. Desta forma, a remoção do corante RB5G pela escama de peixe se mostrou eficiente, a qual apresentou capacidade de adsorção elevada. Os modelos ajustados aos dados cinéticos e de equilíbrio de adsorção descreveram bem os dados experimentais, assim, as informações fornecidas pelos modelos podem ser utilizadas no projeto deste processo em escala piloto.
A exposição aos metais pesados aumentou com o crescimento industrial. Tal fato tem gerado grandes preocupações, uma vez que, os metais pesados não são degradáveis e possui característica cumulativa nos organismos, ocasionando diversas doenças, podendo levar até a morte. Dentre os metais pesados, o ferro ganha destaque por ser um metal essencial ao organismo. Entretanto, em excesso é altamente prejudicial à saúde.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.