The goal of this research is to use a WORKSWELL WIRIS AGRO R INFRARED CAMERA (WWARIC) to assess the crop water stress index (CWSIW) on tomato growth in two soil types. This normalized index (CWSI) can map water stress to prevent drought, mapping yield, and irrigation scheduling. The canopy temperature, air temperature, and vapor pressure deficit were measured and used to calculate the empirical value of the CWSI based on the Idso approach (CWSIIdso). The vegetation water content (VWC) was also measured at each growth stage of tomato growth. The research was conducted as a 2 × 4 factorial experiment arranged in a Completely Randomized Block Design. The treatments imposed were two soil types: sandy loam and silt loam, with four water stress treatment levels at 70–100% FC, 60–70% FC, 50–60% FC, and 40–50% FC on the growth of tomatoes to assess the water stress. The results revealed that CWSIIdso and CWSIW proved a strong correlation in estimating the crop water status at R2 above 0.60 at each growth stage in both soil types. The fruit expansion stage showed the highest correlation at R2 = 0.8363 in sandy loam and R2 = 0.7611 in silt loam. VWC and CWSIW showed a negative relationship with a strong correlation at all the growth stages with R2 values above 0.8 at p < 0.05 in both soil types. Similarly, the CWSIW and yield also showed a negative relationship and a strong correlation with R2 values above 0.95, which indicated that increasing the CWSIW had a negative effect on the yield. However, the total marketable yield ranged from 2.02 to 6.8 kg plant−1 in sandy loam soil and 1.75 to 5.4 kg plant−1 in silty loam soil from a low to high CWSIW. The highest mean marketable yield was obtained in sandy loam soil at 70–100% FC (0.0 < CWSIW ≤ 0.25), while the least-marketable yield was obtained in silty loam soil 40–50% FC (0.75 < CWSIW ≤ 1.0); hence, it is ideal for maintaining the crop water status between 0.0 < CWSIW ≤ 0.25 for the optimum yield. These experimental results proved that the WWARIC effectively assesses the crop water stress index (CWSIW) in tomatoes for mapping the yield and irrigation scheduling.

Drought and water scarcity due to global warming, climate change, and social development have been the most death-defying threat to global agriculture production for the optimization of water and food security. Reflectance indices obtained by an Analytical Spectral Device (ASD) Spec 4 hyperspectral spectrometer from tomato growth in two soil texture types exposed to four water stress levels (70–100% FC, 60–70% FC, 50–60% FC, and 40–50% FC) was deployed to schedule irrigation and management of crops’ water stress. The treatments were replicated four times in a randomized complete block design (RCBD) in a 2 × 4 factorial experiment. Water stress treatments were monitored with Time Domain Reflectometer (TDR) every 12 h before and after irrigation to maintain soil water content at the desired (FC%). Soil electrical conductivity (Ec) was measured daily throughout the growth cycle of tomatoes in both soil types. Ec was revealing a strong correlation with water stress at R2 above 0.95 p < 0.001. Yield was measured at the end of the end of the growing season. The results revealed that yield had a high correlation with water stress at R2 = 0.9758 and 0.9816 p < 0.01 for sandy loam and silty loam soils, respectively. Leaf temperature (LT °C), relative leaf water content (RLWC), leaf chlorophyll content (LCC), Leaf area index (LAI), were measured at each growth stage at the same time spectral reflectance data were measured throughout the growth period. Spectral reflectance indices used were grouped into three: (1) greenness vegetative indices; (2) water overtone vegetation indices; (3) Photochemical Reflectance Index centered at 570 nm (PRI570), and normalized PRI (PRInorm). These reflectance indices were strongly correlated with all four water stress indicators and yield. The results revealed that NDVI, RDVI, WI, NDWI, NDWI1640, PRI570, and PRInorm were the most sensitive indices for estimating crop water stress at each growth stage in both sandy loam and silty loam soils at R2 above 0.35. This study recounts the depth of 858 to 1640 nm band absorption to water stress estimation, comparing it to other band depths to give an insight into the usefulness of ground-based hyperspectral reflectance indices for assessing crop water stress at different growth stages in different soil types.

The efficient use of water and fertilizer is vital for optimizing plant growth and yield in rice production. To achieve sustainable rice production and resource management, the ways in which applied water and nitrogen affect the root and shoot morpho-physiology, as well as yield, must be understood. In this study, a pot experiment was conducted to investigate the effects of slow-release nitrogen fertilizer (sulfur-coated urea) application at three levels (light nitrogen (NL), medium nitrogen (NM), and heavy nitrogen (NH)) on the growth, yield, and nitrogen use efficiency (NUE) of rice grown under three water regimes (wetting and soil saturation (WSS), wetting and moderate drying (WMD) and wetting and severe drying (WSD)). The results revealed that differences in water regimes and fertilizer rates led to significant differences in the roots, shoots, yield, and NUE of rice. Increasing the N dosage by 5% enhanced the root and biomass production by 16% in comparison with that of the other groups. The NH×WSS treatment produced the greatest root length, weight, density, active absorption, and oxidation. However, the integration of WSS × NL generated the maximum value of nitrogen apparent recovery efficiency (63.1% to 67.6%) and the greatest value of nitrogen partial factor productivity (39.9 g g−1 to 41.13 g g−1). Transmission electron microscopy (TEM) images showed that plants grown under high and medium nitrogen fertilizer rates with WSS had improved leaf mesophyll structure with normal starch grains, clear cell walls, and well-developed chloroplasts with tidy and well-arranged thylakoids. These results show that TEM images are useful for characterizing the nitrogen and water status of leaves in the sub-micrometer range and providing specific information regarding the leaf microstructure. The findings of this study suggest that the application of NH×WSS can produce improvements in growth traits and increase rice yield; however, the NL×WSS treatment led to greater NUE, and the authors recommend its usage in rice agriculture.

The use of plant-based indicators and other conventional means to detect the level of water stress in crops may be challenging, due to their difficulties in automation, their arduousness, and their time-consuming nature. Non-contact and non-destructive sensing methods can be used to detect the level of water stress in plants continuously and to provide automatic sensing and controls. This research aimed at determining the viability, efficiency, and swiftness in employing the commercial Workswell WIRIS Agro R infrared camera (WWARIC) in monitoring water stress and scheduling appropriate irrigation regimes in mandarin plants. The experiment used a four-by-three randomized complete block design with 80–100% FC water treatment as full field capacity and three deficit irrigation treatments at 70–75% FC, 60–65% FC, and 50–55% FC. Air temperature, canopy temperature, and vapor pressure deficits were measured and employed to deduce the empirical crop water stress index, using the Idso approach (CWSI(Idso)) as well as baseline equations to calculate non-water stress and water stressed conditions. The relative leaf water content (RLWC) of mandarin plants was also determined for the growing season. From the experiment, CWSI(Idso) and CWSI were estimated using the Workswell Wiris Agro R infrared camera (CWSIW) and showed a high correlation (R2 = 0.75 at p < 0.05) in assessing the extent of water stress in mandarin plants. The results also showed that at an altitude of 12 m above the mandarin canopy, the WWARIC was able to identify water stress using three modes (empirical, differential, and theoretical). The WWARIC’s color map feature, presented in real time, makes the camera a suitable device, as there is no need for complex computations or expert advice before determining the extent of the stress the crops are subjected to. The results prove that this novel use of the WWARIC demonstrated sufficient precision, swiftness, and intelligibility in the real-time detection of the mandarin water stress index and, accordingly, assisted in scheduling irrigation.

The most important biotic stress factor impacting tomato crop biophysical, biochemical, physiological, and morphological features is water stress. A pot experiment was undertaken in a greenhouse to study the drought responsiveness of tomato (Solanum lycopersicum) yield and quality indices in sandy loam and silty loam soils. For both sandy loam and silty loam soils, the water supply levels were 70–100% FC, 60–70% FC, 50–60% FC, and 40–50% FC of ETo (crop evapotranspiration) from the vegetative stage to the fruit ripening stage, calculated using the Hargreaves–Samani (HS) model compared to the time-domain reflectometer (TDR) values calibrated using volumetric water content (VWC). The experiment was conducted as a 2 × 4 factorial experiment, arranged in a completely randomized block design, with four treatments replicated four times. In this study, we examined how sandy loam and silty loam soils at different % FC affect the total marketable yield and quality components of tomatoes, concentrating on total soluble solids (Brix), fruit firmness, dry fruit mass, pH, titratable acid (TA), ascorbic acid (Vit. C), and carotenoid composition. Lycopene and β-Carotene were estimated using the UV spectroscopy method, with absorption spectra bands centered at 451 nm, 472 nm, 485 nm, and 502 nm. The results revealed that even though there were some limitations, TDR-based soil moisture content values had a strong positive correlation with HS-based evapotranspiration, with R2 = 0.8, indicating an improvement whereby TDR can solely be used to estimate soil water content. Tomato plants subjected to 40–50% FC (ETo) water stress in both sandy loam and silty loam soils recorded the highest total soluble solids, titratable acidity, ascorbic acid content, and β-carotene content at an absorption peak of 482 nm, and lycopene content at an absorption peak of 472 nm, with lower fruit firmness, fruit juice content, and fruit juice pH, and a reduced marketable yield. Similarly, tomato plants subjected to 60–70% FC throughout the growing season achieved good fruit firmness, percent juice content, total soluble solids, titratable acidity, ascorbic acid content, and chlorophyll content (SPAD), with minimum fruit juice pH and high marketable yield in both soil textural types. It is concluded that subjecting tomato plants to 60–70% FC (ETo) has a constructive impact on the marketable yield quality indices of tomatoes.