We report the first experimental observation of three-dimensional light bullets, excited by femtosecond pulses in a system featuring quasi-instantaneous cubic nonlinearity and a periodic, transversally modulated refractive index. Stringent evidence of the excitation of light bullets is based on time-gated images and spectra which perfectly match our numerical simulations. Furthermore, we reveal a novel evolution mechanism forcing the light bullets to follow varying dispersion or diffraction conditions, until they leave their existence range and decay.

We experimentally investigate light propagation in a disordered two-dimensional array of mutually coupled optical fibers. In the linear case light either spreads in a diffusive manner or localizes at a few sites. For high excitation power diffusive spreading is arrested by the focusing nonlinearity, i.e., forming a discrete soliton. By contrast, fields, which are localized in the linear regime, can experience both spreading and contraction caused by the nonlinearity.

We report the first experimental observation of vortex light bullets that are discrete, spatiotemporal, solitary waves with orbital angular momentum. We analyze conditions for their existence and investigate their rich properties and dynamics. Vortex light bullets are excited in fiber arrays with spatially shaped femtosecond pulses and analyzed with a spatiotemporal cross correlator. Most importantly, we find that they have entirely new stability properties, being robust against considerable degrees of perturbation in a limited range of energies. All experimental findings are backed up by rigorous simulations, giving further insight into the rich dynamics of vortex light bullets.

The increasing fields of applications for modern optical fibers present great challenges to the material properties and the processing technology of fiber optics. This paper gives an overview of the capabilities and limitations of established vapor deposition fiber preform technologies, and discusses new techniques for improved and extended doping properties in fiber preparation. In addition, alternative fabrication technologies are discussed, such as a powder-based process (REPUSIL) and an optimized glass melting method to overcome the limits of conventional vapor deposition methods concerning the volume fabrication of rare earth (RE)-doped quartz and high silica glasses. The new preform technologies are complementary with respect to enhanced RE solubility, the adjustment of nonlinear fiber properties, and the possibility of hybrid fiber fabrication. The drawing technology is described based on the requirements of specialty fibers such as adjusted preform and fiber diameters, varying coating properties, and the microstructuring of fiber configurations as low as in the nanometer range.

A Fabry-Perot (FP) cavity of simple design and based on a pure silica diaphragm-free hollow tube is proposed. Its operation is based on a first reflection of light at the end of the single-mode fiber that illuminates the silica rod and in a second reflection that takes place at the end of the rod. The FP cavity is characterized for high temperature, pressure and refractive index sensing, showing useful characteristics for the measurement of these three parameters. The diaphragm-free configuration simplifies the measurement of the refractive index of fluids.

In binary aluminosilicate liquids and glasses, heterogeneity on intermediate length scale is a crucial factor for optical fiber performance, determining the lower limit of optical attenuation and Rayleigh scattering, but also clustering and precipitation of optically active dopants, for example, in the fabrication of high-power laser gain media. Here, we consider the low-frequency vibrational modes of such materials for assessing structural heterogeneity on molecular scale. We determine the vibrational density of states VDoS g(ω) using low-temperature heat capacity data. From correlation with low-frequency Raman spectroscopy, we obtain the Raman coupling coefficient. Both experiments allow for the extraction of the average dynamic correlation length as a function of alumina content. We find that this value decreases from about 3.9 nm to 3.3 nm when mildly increasing the alumina content from zero (vitreous silica) to 7 mol%. At the same time, the average inter-particle distance increases slightly due to the presence of oxygen tricluster species. In accordance with Loewensteinian dynamics, this proves that mild alumina doping increases structural homogeneity on molecular scale.

A sensing system for micro-displacement measurement based in a suspended-core fiber Sagnac interferometer is presented. The suspended-core fiber characterization was made through the use of an optical backscatter reflectometer, screening its multimodal and birefringent behavior. Its sensitivity to displacement measurements is shown to be due only to birefringence, being that core-cladding mode coupling is negligible. High precision (~0.45 μm) was obtained using three different measurement instruments, showing an extremely high stability and high insensitivity to temperature, demonstrating that the sensing system has the ability for low cost applications.

In this Letter, we present a fiber loop mirror configuration based on a suspended twin-core fiber for sensing applications. Using the suspended twin-core fiber, the fringe pattern is due to the differential optical patch of the light in the two cores associated with a refractive index difference of approximately 10(-3), which indicates an advantage of this approach compared with those based on high-birefringent fibers, namely, the possibility of using a small length of fiber. The sensing configuration was characterized for torsion, temperature, and strain. Using the fast Fourier transform technique, it is possible to obtain measurand-induced amplitude variations of the fringe pattern. The results obtained indicate the viability of a temperature- and strain-independent torsion sensor.