No abstract

No abstract

In this paper, we report the separations of large, neutral, synthetic polymers using primarily a nonaqueous mobile phase without the use of a supporting electrolyte. The size- exclusion-based mechanism for separation was achieved on sulfonated polystyrene/divinylbenzene stationary phases. The effect of water, voltage, stationary phase exchange capacity, and pore size were investigated. The stationary phase and solvent interactions were studied by attenuated total reflectance Fourier transform infrared spectroscopy (ATR FT-IR) and a possible mechanism for the generation of EOF in the THF/water system is provided. Linear calibration curves were obtained for polystyrenes ranging in MW from 5K to 2M, for columns made using a combination of high capacity ion exchanger and a neutral polystyrene/divinylbenzene material of varied pore sizes. Analysis of polyurethane, polystyrene, and other polymer samples using CEC correlated well with results obtained by conventional HPLC. The size exclusion CEC separations provide an alternative mode for determining the relative molecular weights of polymers, with reduced solvent consumption.

No abstract

In general, chromatographic analysis of chiral compounds involves a minimum of two methods; a primary achiral method for assay and impurity analysis and a secondary chiral method for assessing chiral purity. Achiral method resolves main enantiomeric pairs of component from potential impurities and degradation products and chiral method resolves enantiomeric pairs of the main component and diastereomer pairs. Reversed-phase chromatographic methods are preferred for assay and impurity analysis (high efficiency and selectivity) whereas chiral separation is performed by reverse phase, normal phase, or polar organic mode. In this work, we have demonstrated the use of heart-cutting (LC-LC) and comprehensive two-dimensional liquid chromatography (LC × LC) in simultaneous, sequential achiral and chiral analysis and quantitation of minor, undesired enantiomer in the presence of major, desired enantiomer using phenylalanine as an example. The results were comparable between LC-LC and LC × LC with former offering better sensitivity and accuracy. The quantitation range was over three orders of magnitude with undesired D-phenylalanine detected at approximately 0.3% in the presence of predominant, desired L-phenylalanine (99.7%). The limit of quantitation was comparable to conventional high-performance liquid chromatography. A reversed-phase C18 achiral column in the primary and reversed-phase Chirobiotic Tag chiral column in the secondary dimension were used with a compatible mobile phase.

No abstract

No abstract

We report the successful size-based separations of large, neutral polysaccharides using capillary electrochromatography (CEC). As the polysaccharides possessed little chromophore for photometric detection, two separate approaches were taken. In the first approach, indirect detection was combined with size-exclusion chromatography using a sulfonated polystyrene/divinylbenzene stationary phase. The separations were performed using a 300 Å pore size stationary phase under aqueous conditions. Nonsize based interactions were minimal using this material, resulting in an effective calibration range of molecular masses 180 to 112 000 g?mol 21 for pullulans. In the second approach, the polysaccharides were derivatized with phenylisocyanate and were subsequently separated on columns made using a combination of high capacity ionexchanger and a neutral polystyrene/divinylbenzene material of various pore sizes. The sulfonated ion-exchange phase provided the electroosmotic flow, while the mixed pore size material provided the extended calibration range. The linear range for this primarily nonaqueous system using tetrahydrofuran was determined to be from molecular masses 738 to 404 000 g?mol 21 of the original, untagged pullulan. This approach overcame the limited solubility issue associated with analysis of some polysaccharides. Analysis of pullulan and amylose samples by CEC correlated well with results obtained by conventional high-performance liquid chromatography (HPLC). The sizeexclusion electrochromatographic separations provide an alternative mode for determining the relative molecular weights of polysaccharides with reduced sample and solvent consumption, as well as analysis times.