The Arrhenius parameters of the propagation rate coefficient, kp , are determined employing high-frequency pulsed laser polymerization-size exclusion chromatography (PLP-SEC) for the homologous series of five linear alkyl acrylates (i.e., methyl acrylate (MA), butyl acrylate (BA), dodecyl acrylate (DA), stearyl acrylate (SA), and behenyl acrylate (BeA)) in 1 m solution in butyl acetate (BuAc) as well as in toluene. The comparison of the obtained kp values with the literature known values for bulk demonstrates that no significant solvent influence neither in BuAc nor in toluene on the propagation reaction compared to bulk is detectable. Concomitantly, the kp values in toluene and in BuAc solution display a similar increase with increasing number of C-atoms in the ester side chain as was previously reported for the bulk systems. These findings are in clear contrast to earlier studies, which report a decrease of kp with increasing ester side chain length in toluene. The additional investigation of the longest and shortest ester side chain acrylate (i.e., BeA and MA) over the entire experimentally available concentration range at one temperature (i.e., 50 °C) does not reveal any general concentration dependence and all observed differences in the kp are within the experimental error.

Chemiluminescence (CL) reactions have been widely employed and explored over the past 50 years because they offer unique light emission upon a defined chemical stimulus. In this Minireview, we focus on peroxyoxalate (PO) compounds because they feature very high quantum yields tuneable over the entire visible spectrum, allowing for visible‐light detection by the naked eye without the necessity for expensive analytical instruments. Although analytical methods have been extensively described, PO‐CL read‐out is a strongly emerging field with ample industrial potential. The state‐of‐the‐art PO‐CL detection read‐out systems for various key analytes is here explored. In particular, structural requirements, recent developments of PO‐CL read‐out probes and current limitations of selected examples are detailed. Furthermore, innovative approaches and synthetic routes to push the boundaries of PO‐CL reactions into biological systems are highlighted. Underpinned by recent contributions, we share perspectives on embedding PO‐CL molecules into polymeric materials, which they consider the next step in designing high performance solid‐phase read‐out systems.

Nitrogen-containing methacrylates are a highly interesting class of monomers, yet only very limited data exist describing their propagation rate coefficients, k p. Herein, we investigate the propagation behavior of three N-containing monomers, namely 2-(N,N-diethylamino)­ethyl methacrylate (DEAEMA), 2-(N,N-dimethylamino)­ethyl methacrylate (DMAEMA), and 3-(N,N-dimethylamino)­propyl methacrylate (DMAPMAE), where we systematically vary the ester side chain with respect to spacer and branching length with the aim of establishing if all so far investigated N-containing methacrylates display family type behavior with regard to k p. Thus, the Mark–Houwink–Kuhn–Sakurada parameters alongside the Arrhenius parameters of k p were determined for these monomers via triple detection SEC and pulsed laser polymerization–size exclusion chromatography (PLP-SEC). The obtained data result in Arrhenius parameters for DEAEMA of A = 2.07 (−0.79 to +3.98) × 106 L mol–1 s–1 and E A = 20.45 (−2.02 to +2.28) kJ mol–1, for DMAEMA of A = 2.64 (−0.79 to +1.98) × 106 L mol–1 s–1 and E A = 20.71 (−1.31 to +1.32) kJ mol–1, and for DMAPMAE of A = 1.22 (−0.54 to +8.02) × 106 L mol–1 s–1 and E A = 19.59 (−2.74 to +3.83) kJ mol–1. The data of the herein investigated monomers are critically compared to the previously published data of 2-(N-ethylanilino)­ethyl methacrylate (NEAEMA), 2-(1-piperidyl)­ethyl methacrylate (PipEMA), and 2-morpholino­ethyl methacrylate (MOMA). It is found that DEAEMA and the previously investigated monomers can be described by one family, leading to a joint Arrhenius description for the four monomers NEAEMA, MOMA, PipEMA, and DEAEMA, best described by A = 1.55 (−0.57 to +3.88) × 106 L mol–1 s–1 and E A = 19.68 (−1.76 to +2.60) kJ mol–1.

Detailed knowledge of the polymerization mechanisms and kinetics of academically and industrially relevant monomers is mandatory for the precision synthesis of tailor-made polymers. The IUPAC-recommended pulsed-laser polymerization-size exclusion chromatography (PLP-SEC) approach is the method of choice for the determination of propagation rate coefficients and the associated Arrhenius parameters for free radical polymerization processes. With regard to specific monomer classes-such as acrylate-type monomers, which are very important from a materials point of view-high laser frequencies of up to 500 Hz are mandatory to prevent the formation of mid-chain radicals and the occurrence of chain-breaking events by chain transfer, if industrially relevant temperatures are to be reached and wide temperature ranges are to be explored (up to 70 °C). Herein the progress and state-of-the-art of high-frequency PLP-SEC with pulse repetition rates of 500 Hz is reported, with a critical collection of to-date investigated 500 Hz data as well as future perspectives for the field.

Chemiluminescent (CL) reactions are powerful analytical tools and are present in commercially available everyday objects such as glow sticks. Herein, the photons generated by chemiluminescence are exploited to induce covalent bond breakage and formation, using a chemically generated photonic field at ambient temperature through space as energy transducer. Remarkably, the generated photons enable both the cleavage of species generating radicals as well as the execution of [2 + 2] cycloadditions, demonstrating that disparate types of reactions can be triggered. The herein-presented photochemical concept establishes the field of CL-induced photochemistry, which is poised to enable photochemical transformations in situations where physical light sources, such as lamps, LEDs, and lasers cannot be employed, including in biological environments.