The past two decades have seen far-reaching progress in the development of microfluidic systems for use in the chemical and biological sciences. Here we assess the utility of microfluidic reactor technology as a tool in chemical synthesis in both academic research and industrial applications. We highlight the successes and failures of past research in the field and provide a catalogue of chemistries performed in a microfluidic reactor. We then assess the current roadblocks hindering the widespread use of microfluidic reactors from the perspectives of both synthetic chemistry and industrial application. Finally, we set out seven challenges that we hope will inspire future research in this field.

We present a simple, automated method for high-throughput formation of droplet interface bilayers (DIBs) in a microfluidic device. We can form complex DIB networks that are able to fill predefined three dimensional architectures. Moreover, we demonstrate the flexibility of the system by using a variety of lipids including 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC).

We present a fully integrated droplet-based microfluidic platform for the high-throughput assessment of photodynamic therapy photosensitizer (PDT) efficacy on Escherichia coli. The described platform is able to controllably encapsulate cells and photosensitizer within pL-volume droplets, incubate the droplets over the course of several days, add predetermined concentrations of viability assay agents, expose droplets to varying doses of electromagnetic radiation, and detect both live and dead cells online to score cell viability. The viability of cells after encapsulation and incubation is assessed in a direct fashion, and the viability scoring method is compared to model live/dead systems for calibration. Final results are validated against conventional colony forming unit assays. In addition, we show that the platform can be used to perform concurrent measurements of light and dark toxicity of the PDT agents and that the platform allows simultaneous measurement of experimental parameters that include dark toxicity, photosensitizer concentration, light dose, and oxygenation levels for the development and testing of PDT agents.

The applicability of droplet-based microfluidic systems to many research fields stems from the fact that droplets are generally considered individual and selfcontained reaction vessels. This study demonstrates that, more often than not, the integrity of droplets is not complete, and depends on a range of factors including surfactant type and concentration, the micro-channel surface, droplet storage conditions, and the flow rates used to form and process droplets. Herein, a model microfluidic device is used for droplet generation and storage to allow the comparative study of forty-four different oil/surfactant conditions. Assessment of droplet stability under these conditions suggests a diversity of different droplet failure modes. These failure modes have been classified into families depending on the underlying effect, with both numerical and qualitative models being used to describe the causative effect and to provide practical solutions for droplet failure amelioration in microfluidic systems. V C 2015 AIP Publishing LLC.

Singlet oxygen, a reactive oxygen species, has been a basic synthetic tool in the laboratory for many years. It can be generated either through a chemical process or most commonly via a photochemical process mediated by a sensitizing dye. The relative paucity of singlet oxygen employment in fine chemical industrial settings can be attributed to many factors, not least the requirement for excessive quantities of oxygenated organic solvents and the dangers that these represent. Microcapillary films (MCFs) are comprised of multiple parallel channels embedded in a plastic film. In this study, MCFs are employed as flow reactor systems for the singlet oxygen mediated synthesis of ascaridole. No gaseous oxygen is supplied directly to the reaction, rather mass transport occurs exclusively through the reactor walls. The rate of production of ascaridole was found to be strongly dependent on the partial pressure of oxygen present within the reaction system. This methodology significantly simplifies reactor design, allows for increased safety of operation, and provides for space−time yields over 20 times larger than the corresponding bulk synthesis.

A new type of pharmacokinetic compartment model using artificial cell membranes that predicts intestinal absorption three times more accurately than the current state of the art.

No abstract

Since the first reports two decades ago, droplet-based systems have emerged as a compelling tool for microbiological and (bio)chemical science, with droplet flow providing multiple advantages over standard single-phase microfluidics...