Aerodynamic noise generated in high speed face milling cutters is usually much higher than the noise exposure limit set by OSHA. Experiments were conducted on two different face milling cutters to understand the aerodynamic noise generation in face milling cutters. It is observed that dipole sources of noise are most important in determining the noise generation in rotating face milling cutters. The aerodynamic noise spectrum consists of discrete tones at the rotational frequency and a broad range of higher frequencies, with the broadband spectrum contributing significantly to overall noise. A mathematical model based on the Ffowcs Williams-Hawkings Equation is used to predict (un-weighted) aerodynamic noise. The noise predicted compares well with the experimental observations. The cutter gullet shape was found to be an important factor in determining broadband noise.
A cutting noise prediction model is developed to relate the cutter-workpiece vibrations to the sound pressure field around the cutter in the high-speed face-milling process. The cutter-workpiece vibration data are obtained from a dynamic mechanistic face-milling force simulation model. The total noise predicted, based on both cutting noise and aerodynamic noise prediction, compares well to the noise observed experimentally in the face-milling process. Using the model, the effects of various machining and cutter geometry parameters are studied. It is shown that cutter geometry, machine dynamics, and cutting speed all play important roles in determining overall noise in face milling.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.