No abstract

Different abiotic and biotic disturbances are expected to become more common in the future due to a warming climate. Globally, post-disturbance salvage logging is becoming more predominant to recover economic value from timber in disturbed forests. This study collected comparative time-study data and analyzed the productivity of cutting for windfalls in clear cuttings and determined the cutting costs of windfalls. Furthermore, the logging (i.e., cutting and forwarding) costs of wind-damaged trees and those of undamaged standing Norway spruce (Picea abies (L.) Karst.) trees in clear cuts were calculated in Finland. The results revealed that the cutting productivity of windfalls was 19-33% lower than that of undamaged stems. The cutting costs of windthrown stems with a volume of 0.3-1.5 m 3 were 35-64% higher and the logging costs of windfalls were 10-30% higher than those of undamaged standing stems. The study provided new understanding regarding the productivity and costs of salvage logging operations under Finnish conditions. Even if the logging of windfalls is expensive and laborious, salvage logging operations are important for forest stands and their health to minimize post-disaster damage outbreaks in coniferous forests, such as the damage caused by bark beetles-mainly Ips typographus L.

No abstract

No abstract

No abstract

No abstract

Ovaskainen, H. 2010. Analyzing the views of wood harvesting professionals related to the approaches for increasing the cost-efficiency of wood harvesting from young stands. Silva Fennica 44(3): 481-495.A lot of viable guidelines are currently available for more cost-effective harvesting of energy wood and industrial roundwood (i.e. pulpwood) from young stands. The study ranked the proposed potential approaches for increasing the cost-efficiency of small-diameter (d 1.3 <10 cm) energy wood and industrial roundwood harvesting from early thinnings. Research data, based on a total of 40 personal interviews, was collected in early 2008. The interviewees were divided into four wood harvesting professional groups: 1) Managers in wood procurement organizations, 2) Forest machine contractors, 3) Forest machine manufacturers and vendors, and 4) Wood harvesting researchers.In the opinion of the respondents, there is great potential to increase the cost-efficiency of wood harvesting through improving harvesting conditions (i.e. effective tending of seedling stands, delaying harvesting operations, and pre-clearance of dense undergrowth). The interviewees also underlined that harvesting methods can be rationalized, e.g. multiple-tree handling in industrial roundwood cuttings, crane scale measurement, integrated wood harvesting, and careful selection of stands for harvesting. The strong message given by the interviewees was that the education of forest machine operators must be made more effective in the future. There would be significant possibilities for cost savings in young stands, if methods and techniques with the most potential were utilized completely in wood harvesting.

K. 2010. The effect of supply system on the wood paying capability of a kraft pulp mill using Scots pine harvested from first thinnings. Silva Fennica 44(4): 695-714.The efficiencies of wood supply systems based on cut-to-length (CTL) harvesting, the harvesting of loose whole trees, and whole-tree bundling were compared using the relative wood paying capabilities (WPC) of a kraft pulp mill as decisive criteria. The WPCs from mill to stump were calculated for three first-thinning stands of Scots pine (Pinus sylvestris L.) with mean breast-height diameter of the removal of 6, 8, and 12 cm. Pulp price had a strong effect on the WPC, and the CTL system resulted in the highest WPC per m 3 at stump. The savings in procurement costs and gains in energy generation from additional raw material acquired with the harvesting of loose whole trees did not compensate the losses in pulp production. Considering removal per hectare, loose whole trees gave the highest WPCs at stump in the two stands with the smallest trees and the highest proportion of additional raw material. Decrease in pulp price and increase in energy price improved the competitiveness of the whole-tree systems. In the case of whole-tree bundling, savings in transportation costs did not balance the high cutting and compaction costs, and the bundling system was the least competitive alternative.