No abstract

Despite the great promise of printed flexible electronics from 2D crystals, and especially graphene, few scalable applications have been reported so far that can be termed roll‐to‐roll compatible. Here we combine screen printed graphene with photonic annealing to realize radio‐frequency identification devices with a reading range of up to 4 meters. Most notably our approach leads to fatigue resistant devices showing less than 1% deterioration of electrical properties after 1000 bending cycles. The bending fatigue resistance demonstrated on a variety of technologically relevant plastic and paper substrates renders the material highly suitable for various printable wearable devices, where repeatable dynamic bending stress is expected during usage. All applied printing and post‐processing methods are compatible with roll‐to‐roll manufacturing and temperature sensitive flexible substrates providing a platform for the scalable manufacturing of mechanically stable and environmentally friendly graphene printed electronics.

Abstract-In this paper, we present an UHF RFID location tracking system, which is based on measuring the phases of backscattered signals from RFID tag using multiple spatially distributed antennas at a single carrier frequency. The wavelength ambiguity of the phase measurements is resolved by using the extended Kalman filter (EKF) and the Rauch-TungStriebel (RTS) smoother, where the state includes the position, velocity and the phase offsets of antennas. The performance of the method is experimentally verified at 890 MHz using a commercially available RFID reader.

No abstract