The aim of the Korea superconducting tokamak advanced research (KSTAR) project is to develop a steady-state-capable advanced superconducting tokamak for establishing a scientific and technological basis for an attractive fusion reactor. Since the KSTAR mission includes the achievement of a steady-state-capable operation, the use of superconducting coils is an obvious choice for the magnet system. The KSTAR superconducting magnet system consists of 16 toroidal field (TF) and 14 poloidal field (PF) coils which include 8 central solenoid coils. Both the TF and PF coil systems use internally-cooled cable-in-conduit conductors (CICC). The TF coil system provides a magnetic field of 3.5 T at the plasma centre and the PF coil system provide a flux swing of 17 V s. The major achievement in the KSTAR magnet system development includes the development of CICC, a full size TF model coil, a background magnetic field generation coil system and the construction of a large scale superconducting magnet and the CICC test facility. TF and PF coils are at the stage of fabrication for the KSTAR completion in the year 2007.

The KSTAR Central Solenoid Model Coils (CSMC), which are in the form of split coils with same dimension, have been tested. The CSMC were successfully charged up to 20 kA and down to zero with different ramp rates. Various pulse waveforms were applied to the CSMC to analyse the AC-loss characteristics of the coils. The measurement method was a gas-flow calorimetry. In this work, two types of waveforms, the DC-biased sinusoidal wave ( = 2, 4 kA;

No abstract

No abstract

The KSTAR (Korea Superconducting Tokamak Advanced Research) superconducting magnet system adopts a superconducting CICC(Cable-In-Conduit Conductor) type conductor. It consists of 16 TF (Toroidal Field) coils and 14 PF (Poroidal Field) coils and it also uses two different types of CICCs-Nb 3 Sn cable with Incoloy 908 conduit and NbTi cable with 316LN stainlesssteel conduit. A special CICC jacketing system is developed for the KSTAR CICC fabrication: the tube-mill process, which consists of forming, welding, sizing and squaring procedure. The cabling process for TF and PF superconducting cable and the fabrication process of each CICCs (TF CICC and PF CICC) is described. The welding of conduit materials are also discussed. The fabrication results such as the geometrical specification, micro structure and the void fraction will be discussed.

No abstract

No abstract