No abstract

No abstract

The determination of bisphenol A (BPA) and/or bisphenol A diglycidyl ether (BADGE) in foods sold in Japanese markets and in water leached from six epoxy resin cans with similar diameters was carried out using high-performance liquid chromatography (HPLC) with electrochemical detection (LC/ECD), LC-mass spectrometric detection (LC/MS) and LC-tandem mass spectrometric detection (LC/MS/MS). BPA concentrations were 0-842 ng g(-1) for 48 canned foods, 0-14 ng g(-1) for 23 foods in plastic containers, and 0-1 ng g(-1) for 16 foods in paper containers. No BADGE was detected in three canned foods. There was no difference in leaching concentrations of BPA into glycine buffers at pHs 8 and 11, and water. The amounts of BPA leached into water from six epoxy resin cans held at 121 degrees C for 20 min were almost the same as the cans' contents and were much higher than the amounts leached from cans held at or below 80 degrees C for 60 min. The amount leached depended on the type of can, but not on the amount of BADGE leached from the cans. Considerably more BPA than BADGE leached to water from six cans. Two cans whose contents had high concentrations of BPA showed no BADGE leaching even at 121 degrees C, suggesting the different kinds of epoxy resin can linings from others. The results imply that the main source of human exposure to BPA is food from cans with linings that contain high percentages of BPA as an additive or an unforeseen contaminant.

Bisphenol A (BPA), bisphenol A diglycidyl ether (BADGE), and their derivatives in 38 canned foods sold in Japan were measured using high-performance liquid chromatography-mass spectrometry (LC-MS) and LC-tandem mass spectrometry (LC-MS/MS). BPA, BADGE, BADGE.2H 2O, BADGE.HCl.H2O, BADGE.HCl, and BADGE.2HCl were 0-235.4, 0-3.4, 0-247.2, 0.2-196.4, 0-3.0, and 0-25.7 ng/g, respectively, which did not exceed acceptable daily intake for BPA and specific migration limit for BADGEs. BADGE was degraded by 58, 100, 46, and 58% in water (pH 7), 0.01 N HCl (pH 2), 0.01 N NaCl (pH 6.8), and 0.01 N NaCl with acetic acid (pH 2.5), respectively, when it was allowed to stand at 120 degrees C for 30 min. The prominent derivatives formed were BADGE.2H 2O and BADGE.HCl.H2O, which was formed not only in BADGE with added HCl but also in that with NaCl. Acetic acid accelerated the formation of both BADGE.2H2O and BADGE.HCl.H2O in NaCl. No BPA was detected in any simulation samples started from BADGE. The results suggest that BPA and BADGE are independently leached into canned foods and that BADGE is easily changed to more stable compounds such as BADGE.2H2O and BADGE.HCl.H2O by sterilization.