The physical composition and stress state of soil-rock mixture (SRM) materials have a crucial influence on their mechanical properties, and play a vital role in improving the performance of subgrade. To reveal the resilient behavior and mesostructure evolution of SRM materials, triaxial tests and discrete element method (DEM) numerical analysis have been carried out. In the triaxial test section, the mechanical response of SRM materials was investigated by preparing samples under different stress states and physical states and conducting triaxial tests on samples. Simultaneously, a new irregular particle modeling method was developed and applied to the discrete element modeling process to analyze the mesostructure evolution of SRM materials under cycling loading. First, a cyclic triaxial test of SRM material is performed on the SRM material, and the effects of bulk stress, octahedral shear stress and rock content on the resilient modulus of the SRM material are analyzed. It is revealed that the resilient modulus increases with increasing bulk stress and rock content, and decreases with increasing octahedral shear stress. Based on a new resilient modulus prediction model, the relationships among the rock content, stress state and resilient modulus are established. Then, based on an improved DEM modeling method, a discrete element model of the SRM is established, and the influence of rock content on coordination number and mesostructure evolution of the SRM is analyzed. The results show that in SRM materials, the increase of crushed rock changes the mesostructure of the SRM material. With the increase of rock content, the internal contact force changes from “between soil and rock” to “between rocks”, and the skeleton formed in the rocks gradually develops overall stiffness. Under the condition of low stress, the anisotropy of the SRM material is mainly caused by the shape and grade distribution of crushed rock. The induced anisotropy caused by the change of stress state has little effect on its mechanical behavior, which may lead to the greater dispersion of multiple SRM test results.
The soil water characteristic curve and microstructure evolution of unsaturated expansive soil improved by microorganisms in Nanning, Guangxi were studied by means of filter paper method and scanning electron microscope imaging (SEM). Based on Fredlung & Xing model, the influence law of different cement content on the soil water characteristic curve of improved expansive soil is proved. According to the analysis of SEM test results, the influence mechanism of MICP method on the engineering characteristics of improved expansive soil is revealed. The results show that with the increase of cement content, the saturated water content and residual water content of the improved expansive soil gradually increased. At the same time, the water stability gradually increased while the air inlet value gradually decreased. The improved expansive soil changes from the superposition of flat particles and flake particles to the contact between spherical particles and flake particles, which indicates that the aggregate increases significantly. With the increase of the content of cement solution, the contact between particles tends to be smooth and the soil pores gradually tend to be evenly distributed. The particle size and microstructure of soil particles was changed and the connection between particles was enhanced in the improved expansive soil. Eventually the strength and water stability of expansive soil were improved. The conclusions above not only provide a theoretical basis for the in-depth study of engineering characteristics of unsaturated expansive soil improved by MICP method, but also offer theoretical evidence for perfecting engineering technology of expansive soil improved by MICP method.
Most of the research studies on the improvement of expansive soils are focused on reducing their expansive properties; however, there are few studies on the impact of the soil compressibility after the improvement. In this paper, through indoor high-pressure consolidation tests, the recent microbial-induced calcium carbonate precipitation (MICP) technology is studied to improve the compression characteristics of the expansive soil. The significant effect of different microbial concentrations (achieved by different number of treatments) on the compression deformation is revealed with the hyperbolic function that involves two parameters with clear physical meanings. In particular, after 6 times of treatment with the microbial solution, the compression characteristics of the expansive soil reach the best improvement effect; continuing to increase the number of microbial treatments is, otherwise, not conducive to improving the soil compression performance. Also, a dramatical increase of the structural strength of the microbial-treated expansive soil is presented and investigated. Moreover, we performed a scanning electron microscope (SEM) experiment and confirmed the existence of crystals due to mineralization. This study shows that MICP is an effective and environmentally friendly means of reducing the compressibility of the expansive soil.
The soil-water characteristic curve of silty soil in seasonal frozen area during freezing-thawing process was studied in this study. By means of a laboratory test, specimens with different compaction degrees and different initial moisture content were prepared and put into the temperature change testing machine for freeze-thaw action. The influence of different degrees of compaction and different times of freeze-thaw action on SWCC of low liquid limit silt was analyzed, a V-G model was used to fit the test data, and a set of fitting parameters with a reference value was obtained. At the same time, the change of microstructure between soil particles during the freezing-thawing cycle is illustrated. The results showed that with the same water content and the same compactness, the matric suction of the test soil decreased with the increase of freeze-thaw cycles. For the same number of freeze-thaw cycles, the greater the compactness, the greater the matric suction of the soil. The V-G model can well represent the SWCC of low liquid limit silt during the freeze-thaw cycle.
The resilient modulus of subgrade is a design parameter of the pavement structure, which is significantly affected by the overlying load and traffic load. It is important to calculate the equivalent resilient modulus of the top surface of subgrade based on the nonuniform distribution of resilient modulus in subgrade. This paper takes the fully weathered granite soil as the research object. Firstly, the soil density of different layers of the subgrade structure is calculated by the degree of compaction of different subgrade layers. Secondly, the overlying load of each point in the subgrade is determined based on the quality of subgrade. Thirdly, the subprogram of the finite element software is compiled and redeveloped based on the elastic constitutive model, and the calculation method for the resilient modulus of each point in the subgrade under the traffic load is proposed when the convergence criterion is set up. Finally, according to the deflection equivalence of the elastic double layer and elastic half-space, the calculation and control methods for equivalent resilient modulus of the top surface of subgrade under nonuniform stress distribution are put forward, and the field verification tests are carried out. The results show that the error range between numerical calculation and field measurement of equivalent resilient modulus of subgrade is 10%. It shows that the calculation method for equivalent resilient modulus of subgrade proposed in this study is reasonable and effective. The equivalent resilient modulus of subgrade decreases with the increase of traffic load. And the resilient modulus of subgrade soil increases with the increase of subgrade depth. The resilient modulus of subgrade soil has a significant impact on the equivalent resilient modulus of subgrade after the overlaying gravel layer. The equivalent resilient modulus of the subgrade with the gravel layer increases with the increase of the resilient modulus of the subgrade soil.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.