Coal dust is a great threat to coal mine workers' health and safety in coal mine production. Wet dust removal is one of the effective dust removal methods. As a solid, coal has different rough surfaces, which have a certain effect on the wetting effect of coal. In this paper, three coal samples with different surface wettability are used as the research objects. Phase-field interface tracking method is used to simulate the wetting of droplets on rough surfaces. From the simulation results, it can be concluded that the influence of the rough interface on the contact angle of the droplets is in accordance with the change rule described in the Wenzel model. As the roughness increases, the contact angle of the hydrophilic lignite surface gradually decreases. As the roughness increases, the contact angle of hydrophobic coking coal gradually increases. The change trend of the contact on the surface of weakly hydrophilic anthracite coal is the same as that of lignite. Due to the local and global differences, the contact angles obtained from the numerical model are slightly different from the values calculated from the Wenzel model.

No abstract

No abstract

No abstract

No abstract

AbstractIn this study, the pressure sensitivity and temperature sensitivity of the diphasic electric conduction concrete were investigated by measuring the resistivity using the four-electrode method. The diphasic electric conduction concrete was obtained by mixing nano and micro conductive materials (carbon nanofibers, nano carbon black and steel slag powder) into the carbon fiber reinforced concrete (CFRC). The results indicated that, with the increase of conduction time, the resistivity of CFRC decreased slightly at the initial stage and then became steady, while the resistivity of CFRC containing nano carbon black had a sharp decrease at the dosage of 0.6%. With the increase of compression load, the coefficient of resistivity variation of CFRC containing nano carbon black and steel slag powder changed little. The coefficient of resistivity variation increased with the increase of steel slag powder in the dry environment, and CFRC had preferable pressure sensitivity when the mass fractions of carbon fiber and carbon nanofiber were 0.4% and 0.6%, respectively. Besides, in the humid environment, the coefficient of resistivity variation decreased with the increase of steel slag powder, and the diphasic electric conduction concrete containing 0.4% carbon fibers and 20% steel slag powder had the best pressure sensitivity under the damp environment. Moreover, in the dry environment, CFRC containing nano and micro conductive materials presented better temperature sensitivity in the heating stage than in the cooling stage no matter carbon nanofiber, nano carbon black or steel slag powder was used, especially for the CFRC containing steel slag powder.

No abstract

No abstract