Reactive flow cylinder code runs on six explosives were made with rate constants varying from 0.03 to 70 μs−1. Six unconfined/steel sets of original ANFO and dynamite data are presented. A means of comparing confinement effects both at constant radius and at constant detonation velocity is presented. Calculations show two qualitatively different modes of behavior. For Us/Co≥1.2, where Us is the detonation velocity and Co the zero‐pressure sound speed in steel, we find a sharp shock wave in the metal. The shock passes through the steel and the outer wall has a velocity jump‐off. For Us/Co≤1.04, we find a pressure gradient that moves at the detonation velocity. A precursor pulse drives in the explosive ahead of the detonation front. The outer wall begins to move outward at the same time the shock arrives in the explosive, and the outer wall slowly and continuously increases in velocity. The Us/Co≥1.2 cylinders saturate in detonation velocity for thick walls but the Us/Co<<1.04 case does not. The unconfined cylinder shows an edge lag in the front that approximately equals the reaction zone length, but the highly confined detonation front is straight and contains no reaction zone information. The wall thickness divided by the reaction zone length yields a dimensionless wall thickness, which allows comparison of explosives with different detonation rates. Even so, a rate effect is found in the detonation velocities, which amounts to the inverse 0.15–0.5 power.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.