We investigate the shape and mechanical properties of liquid interfaces down to nanometer scale by atomic force microscopy (AFM) and scanning electron microscopy (SEM) combined with in situ micromanipulation techniques. In both cases, the interface is probed with a cylindrical nanofiber with radius R of the order of 25-100 nm. The effective spring constant of the nanomeniscus oscillated around its equilibrium position is determined by static and frequencymodulation (FM) AFM modes. In the case of an unbounded meniscus, we find that the effective spring constant k is proportional to the surface tension γ of the liquid through k = (0.51±0.06) γ, regardless of the excitation frequency from quasistatic up to 450 kHz. A model based on the equilibrium shape of the meniscus reproduces well the experimental data. Electron microscopy allowed to visualize the meniscus profile around the fiber with a lateral resolution of the order of 10 nm and confirmed its catenary shape. The influence of a lateral confinement of the interface is also investigated. We showed that the lateral extension L of the meniscus influences the effective spring constant following a logarithmic evolution k ~ 2πγ⁄ln(L/R) deduced from the model. This comprehensive study of liquid interface properties over more than four orders of magnitude in meniscus size, shows that advanced FM-AFM and SEM techniques are promising tools for the investigation of mechanical properties of liquids down to nanometer scale.2

Biocompatible microencapsulation is of widespread interest for the targeted delivery of active species in fields such as pharmaceuticals, cosmetics and agro-chemistry. Capsules obtained by the self-assembly of polymers at interfaces enable the combination of responsiveness to stimuli, biocompatibility and scaled up production. Here, we present a one-step method to produce in situ membranes at oil-water interfaces, based on the hydrogen bond complexation of polymers between H-bond acceptor and donor in the oil and aqueous phases, respectively. This robust process is realized through different methods, to obtain capsules of various sizes, from the micrometer scale using microfluidics or rotor-stator emulsification up to the centimeter scale using drop dripping. The polymer layer exhibits unique self-healing and pH-responsive properties. The membrane is viscoelastic at pH = 3, softens as pH is progressively raised, and eventually dissolves above pH = 6 to release the oil phase. This one-step method of preparation paves the way to the production of large quantities of functional capsules.