A series of polyesters based on 2-propargyl-1,3-propanediol or 2,2-dipropargyl-1,3-propanediol or 2-allyl-2-propargyl-1,3-propanediol and 1,20-eicosanedioic acid were prepared by solution polycondensation using the corresponding diacid chloride; these polyesters were quantitatively "clicked" with a fluoroalkyl azide, namely CF3(CF2)7CH2CH2N3, to yield polyesters carrying long-chain alkylene segments in the backbone and either one or two perfluoroalkyl segments located at periodic intervals along the polymer chain. The immiscibility of the alkylene and fluoroalkyl segments causes the polymer chains to fold in a zigzag fashion to facilitate the segregation of these segments; the folded chains further organize in the solid state to form a lamellar structure with alternating domains of alkyl (HC) and fluoroalkyl (FC) segments. Evidence for the self-segregation is provided by DSC, SAXS, WAXS, and TEM studies; in two of the samples, the DSC thermograms showed two distinct endotherms associated with the melting of the individual domains, while the WAXS patterns confirm the existence of two separate peaks corresponding to the interchain distances within the crystalline lattices of the HC and FC domains. SAXS data, on the other hand, reveal the formation of an extended lamellar morphology with an interlamellar spacing that matches reasonably well with those estimated from TEM studies. Interestingly, a smectic-type liquid crystalline phase is observed at temperatures between the two melting transitions. These systems present a unique opportunity to develop interesting nanostructured polymeric materials with precise control over both the domain size and morphology; importantly, the domain sizes are far smaller than those typically observed in traditional block copolymers.
Dense suspensions of colloidal or granular particles can display pronounced non-Newtonian behaviour, such as discontinuous shear thickening and shear jamming. The essential contribution of particle surface roughness and adhesive forces confirms that stress-activated frictional contacts can play a key role in these phenomena. Here, by employing a system of microparticles coated by responsive polymers, we report experimental evidence that the relative contributions of friction, adhesion, and surface roughness can be tuned in situ as a function of temperature. Modifying temperature during shear therefore allows contact conditions to be regulated, and discontinuous shear thickening to be switched on and off on demand. The macroscopic rheological response follows the dictates of independent single-particle characterization of adhesive and tribological properties, obtained by colloidal-probe atomic force microscopy. Our findings identify additional routes for the design of smart non-Newtonian fluids and open a way to more directly connect experiments to computational models of sheared suspensions.
Hydrogel surfaces are of great importance in numerous applications ranging from cell-growth studies and hydrogel-patch adhesion to catheter coatings and contact lenses. A common method to control the structure and...
The mechanism of surface-initiated
atom transfer polymerization
(SI-ATRP) of methacrylates in confined volumes is systematically investigated
by finely tuning the distance between a grafting surface and an inert
plane by means of nanosized patterns and micrometer thick foils. The
polymers were synthesized from monolayers of photocleavable initiators,
which allow the analysis of detached brushes by size-exclusion chromatography
(SEC). Compared to brushes synthesized under “open”
polymerization mixtures, nearly a 4-fold increase in brush molar mass
was recorded when SI-ATRP was performed within highly confined reaction
volumes. Correlating the SI-ATRP of methyl methacrylate (MMA), with
and without “sacrificial” initiator, to that of lauryl
methacrylate (LMA) and analyzing the brush growth rates within differently
confined volumes, we demonstrate faster grafting kinetics with increasing
confinement due to the progressive hindering of CuII-based
deactivators from the brush propagating front. This effect is especially
noticeable when viscous polymerization mixtures are generated and
enables the synthesis of several hundred nanometer thick brushes within
relatively short polymerization times. The faster rates of confined
SI-ATRP can be additionally used to fabricate, in one pot, precisely
structured brush gradients, when volume confinement is continuously
varied across a single substrate by spatially tuning the vertical
distance between the grafting and the confining surfaces.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.