Here we present the critical role of the molecular structure and reaction parameters on the nature of thin-film growth, using a versatile two-step assembly method with organic and metal-organic chromophores cross-linked with palladium. It was found that the polypyridyl complexes exhibit exponential growth, whereas, under identical conditions, the organic systems exhibit linear behavior. The internal film morphology plays a pivotal role in the storage and usage of the palladium, where a more porous structure results in exponential growth. Interestingly, through proper tuning of the reaction conditions, the growth of the molecular assemblies can be controlled, resulting in a changeover from exponential to linear growth. These findings unequivocally demonstrate the importance of both the internal film structure and deposition conditions on the assembly of molecular-based films.
Here we report the first use of self-propagating molecule-based assemblies (SPMAs) as efficient electron-transporting layers for inverted organic photovoltaic (OPV) cells. P3HT-PCBM cells functionalized with optimized SPMAs exhibit power conversion efficiencies approaching 3.6% (open circuit voltage = 0.6 V) vs 1.5% and 2.4% for the bare ITO and Cs(2)CO(3)-coated devices, respectively. The dependence of cell response parameters on interlayer thickness is investigated, providing insight into how to further optimize device performance.
Flip‐flopping away: Multivalue random access memory can be achieved using electrically addressable Os2+‐based multilayers. The controllable optical properties of the multilayers allow the construction of memory devices that are able to store up to five different states that depend on the given electrical inputs (see picture). The functions of the devices can be represented by sequential logic circuits that are equivalent to flip‐flop and flip‐flap‐flop devices.
The highly active Friedel-Crafts alkylation (FCA) catalyst, [Ir(COD)Cl(SnCl3)(SnCl4)(arene)]+Cl- (1-SnCl4), is easily generated in one-pot from [Ir(COD)Cl]2 or [Ir(COD)(mu-Cl)Cl(SnCl3)]2 (1) and SnCl4. The reaction of arenes, heteroarenes with benzyl, and allyl alcohols is promoted by 1-SnCl4 (1 mol %) with high turnover frequency. Kinetic evidence is presented to establish FCA pattern. From dual-catalyst combination studies varying the transition metal and main group metal partner, the efficiency of the present catalysts is attributed to the electrophilic "IrIII-SnIV" core.
Disclosed here is a molecular switch which responds to acid-base stimuli and serves as a bi-state catalyst for two different reactions. The two states of the switch serve as a highly active and poorly active catalyst for two catalytic reactions (namely a hydrogenation and a dehydrogenative coupling) but in a complementary manner. The system was used in an assisted tandem catalysis set-up involving dehydrogenative coupling of an amine and then hydrogenation of the resulting imine product by switching between the respective states of the catalyst.
Cyclometalated complexes are an important class of (pre)catalysts in many reactions including hydride transfer. The ring size of such complexes could therefore be a relevant aspect to consider while modulating their catalytic activity. However, any correlation between the cyclometalating ring size and the catalytic activity should be drawn by careful assessment of the pertinent geometrical parameters, and overall electronic effects thereof. In this study, we investigated the vital role of key stereoelectronic functions of two classes of iridacyclic complexes-five-membered and six-membered cycles-in manupulating the catalytic efficiency in a model hydride-transfer reaction. Our investigation revealed that there exists an interesting multidimensional synergy among all the relevant stereoelectronic factors-yaw angle, bite angle, and the electronic properties of both the ligand and the metal center-that governs the hydride donor ability (hydricity) of the complexes during catalysis. Thus the six-membered chelate complexes with small yaw and large bite angles, strong donor ligand, and electron-rich metal were found to be better catalysts than their five-membered analogues. A frontier molecular orbital analysis supported the significant role of the above stereoelectronic synergistic effect associated with the chelate ring to control the hydride donor ability of the complexes.
Reactions of arenes and heteroarenes with aromatic aldehydes proceeded smoothly in the presence of a catalytic combination of [Ir(COD)Cl]2-SnCl4 to afford the corresponding triarylmethane derivatives (TRAMs) in high yields. This 100% TRAM selective transformation is clean and eliminates the use of acid systems.
Catalytic
conversion of CO2 via “transfer hydrogenation”
using renewable non-H2 compounds (such as biomass-derived
(poly)alcohols) to produce valuable energy-relevant chemicals, is
a promising alternative strategy to the traditionally employed “hydrogenation”
of CO2 with gaseous H2. However, the CO2-transfer hydrogenation has been explored exceptionally less,
and limited but encouraging success has been achieved in recent time
by applying high pressure (up to 50 atm) of CO2 gas. For
safe and simple operation, ambient-pressure protocols are desirable,
and toward this end, suitable catalysts are required. Aiming to this
goal, herein we report an efficient Ir–aNHC
catalyst (aNHC = an abnormal NHC ligand) to achieve
ambient-pressure CO2-transfer hydrogenation catalysis for
generating formate salt (HCO2
–) at the
turnover frequency (TOF) value of 90 h–1 in 12 h
of reaction at 150 °C using glycerol as hydrogen source.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.