Stimuli responsive materials are capable of mimicking the operation characteristics of logic gates such as AND, OR, NOR, and even flip-flops. Since the development of molecular sensors and the introduction of the first AND gate in solution by de Silva in 1993, Molecular (Boolean) Logic and Computing (MBLC) has become increasingly popular. In this Account, we present recent research activities that focus on MBLC with electrochromic polymers and metal polypyridyl complexes on a solid support. Metal polypyridyl complexes act as useful sensors to a variety of analytes in solution (i.e., H(2)O, Fe(2+/3+), Cr(6+), NO(+)) and in the gas phase (NO(x) in air). This information transfer, whether the analyte is present, is based on the reversible redox chemistry of the metal complexes, which are stable up to 200 °C in air. The concurrent changes in the optical properties are nondestructive and fast. In such a setup, the input is directly related to the output and, therefore, can be represented by one-input logic gates. These input-output relationships are extendable for mimicking the diverse functions of essential molecular logic gates and circuits within a set of Boolean algebraic operations. Such a molecular approach towards Boolean logic has yielded a series of proof-of-concept devices: logic gates, multiplexers, half-adders, and flip-flop logic circuits. MBLC is a versatile and, potentially, a parallel approach to silicon circuits: assemblies of these molecular gates can perform a wide variety of logic tasks through reconfiguration of their inputs. Although these developments do not require a semiconductor blueprint, similar guidelines such as signal propagation, gate-to-gate communication, propagation delay, and combinatorial and sequential logic will play a critical role in allowing this field to mature. For instance, gate-to-gate communication by chemical wiring of the gates with metal ions as electron carriers results in the integration of stand-alone systems: the output of one gate is used as the input for another gate. Using the same setup, we were able to display both combinatorial and sequential logic. We have demonstrated MBLC by coupling electrochemical inputs with optical readout, which resulted in various logic architectures built on a redox-active, functionalized surface. Electrochemically operated sequential logic systems such as flip-flops, multivalued logic, and multistate memory could enhance computational power without increasing spatial requirements. Applying multivalued digits in data storage could exponentially increase memory capacity. Furthermore, we evaluate the pros and cons of MBLC and identify targets for future research in this Account.

Here we present the critical role of the molecular structure and reaction parameters on the nature of thin-film growth, using a versatile two-step assembly method with organic and metal-organic chromophores cross-linked with palladium. It was found that the polypyridyl complexes exhibit exponential growth, whereas, under identical conditions, the organic systems exhibit linear behavior. The internal film morphology plays a pivotal role in the storage and usage of the palladium, where a more porous structure results in exponential growth. Interestingly, through proper tuning of the reaction conditions, the growth of the molecular assemblies can be controlled, resulting in a changeover from exponential to linear growth. These findings unequivocally demonstrate the importance of both the internal film structure and deposition conditions on the assembly of molecular-based films.

CONSPECTUS: Since the first description of coordination complexes, many types of metal-ligand interactions have creatively been used in the chemical sciences. The rich coordination chemistry of pyridine-type ligands has contributed significantly to the incorporation of diverse metal ions into functional materials. Here we discuss molecular assemblies (MAs) formed with a variety of pyridine-type compounds and a metal containing cross-linker (e.g., PdCl2(PhCN2)). These MAs are formed using Layer-by-Layer (LbL) deposition from solution that allows for precise fitting of the assembly properties through molecular programming. The position of each component can be controlled by altering the assembly sequence, while the degree of intermolecular interactions can be varied by the level of π-conjugation and the availability of metal coordination sites. By setting the structural parameters (e.g., bond angles, number of coordination sites, geometry) of the ligand, control over MA structure was achieved, resulting in surface-confined metal-organic networks and oligomers. Unlike MAs that are constructed with organic ligands, MAs with polypyridyl complexes of ruthenium, osmium, and cobalt are active participants in their own formation and amplify the growth of the incoming molecular layer. Such a self-propagating behavior for molecular systems is rare, and the mechanism of their formation will be discussed. These exponentially growing MAs are capable of storing metal salts that can be used during the buildup of additional molecular layers. Various parameters influencing the film growth mechanism will be presented, including (i) the number of binding sites and geometry of the organic ligands, (ii) the metal and the structure of the polypyridyl complexes, (iii) the influence of the metal cross-linker (e.g., second or third row transition metals), and (iv) the deposition conditions. By systematic variation of these parameters, switching between linear and exponential growth could be demonstrated for MAs containing structurally well-defined polypyridyl complexes. The porosity of the MAs has been estimated by using electrochemically active probes. Incorporating multiple polypyridyl complexes of osmium and ruthenium into a single assembly give rise to composite materials that exhibit interesting electrochemical and electrochromic properties. These functional composites are especially attractive as they exhibit properties that neither of each metal complex possesses individually. Some of our MAs have very high coloration efficiencies, redox stability, fast responsive times and operate at voltages < 1.5 V. Moreover, their electrochemical properties are dependent on the deposition sequence of the polypyridyl complexes, resulting in MAs that possesses distinctive electron transfer pathways. Finally, some of these MAs are described in terms of their practical applications in electrochromic materials, storage-release chemistry, solar cells, and electron transport properties.

Flip‐flopping away: Multivalue random access memory can be achieved using electrically addressable Os2+‐based multilayers. The controllable optical properties of the multilayers allow the construction of memory devices that are able to store up to five different states that depend on the given electrical inputs (see picture). The functions of the devices can be represented by sequential logic circuits that are equivalent to flip‐flop and flip‐flap‐flop devices.

We demonstrate the on-surface formation of homogeneous and uniform electrochromic films via ultrasonic spray coating. This fully automated process is capable of fabricating metallo-organic films on transparent conducting oxides (TCOs) on glass or flexible poly­(ethylene terephthalate) (PET) with surface areas of up to 36 cm2 and film thicknesses of half a micron. The assembly process involves alternatingly spray-coating dilute solutions of structurally well-defined iron polypyridyl ([Fe­(mbpy-py)3]2+) complexes and bis­(benzonitrile)palladium dichloride (Pd­(PhCN)2Cl2) onto conductive substrates, where the latter palladium salt was used as the inorganic cross-linker. The on-surface self-assembled three-dimensional networks are intensely colored and were subsequently integrated into laminated electrochromic devices (ECDs) containing a lithium-based gel electrolyte. The ECDs retain their intense color in the ground state, having a ΔT max of 40–49% at λmax ≈ 600 nm, and can be operated for up to 1500 redox cycles. The fluorine-doped tin oxide counter electrode coated with poly­(3,4-ethylene-dioxythiophene)­polystyrene sulfonate (PEDOT:PSS) as a charge-storage layer resulted in these stable devices. A significant decrease in the potential window of ΔE ≈ 2.5 V was achieved by using a metal grid on PET as the counter electrode. The operation of the electrochromic films is diffusion-controlled, and the diffusion coefficients (D f) reflect their molecular densities. During these studies, we found that ClO4 – is a suitable counterion of the lithium-based electrolytes for optimal ECD performance.