This research reports on an experimental and numerical study of material failure in the electrode assemblies (i.e. "jelly roll" and/or "electrode stack") of lithium-ion batteries after local mechanical loading. Deformed cylindrical and pouch cells (i.e. lithium-ion polymer cells) were subjected to X-ray computed tomography (CT scanning) to detect location, size, and orientation of cracks that developed in the electrode assemblies at onset of short-circuit. An experimental program was completed to acquire properties of electrode-separator micro components of electrode assemblies in tension. This data was used for calibration of an anisotropic material model. Finite element models were developed for both cell types and a maximum strain criteria was used for element failure and deletion at short circuit. The models developed here predict the location of cracks in both pouch and cylindrical cells. The finite element models corroborated the CT scan regarding location and orientation of cracks formed in the electrode assemblies. In both pouch and cylindrical cells, cracks were found to initiate perpendicular to the transverse direction of the separator. Fig. 3 Simulation of the crack through element erosion using the two models for 18650 cell. 80372 | RSC Adv., 2015, 5, 80369-80380 This journal is
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.