The quality of electrical power in a network is a major concern which has to be examined with caution in order to achieve a reliable electrical power system network. Reactive power compensation is a means for realising the goal of a qualitative and reliable electrical power system. This paper made a comparative review of reactive power compensation technologies; the devices reviewed include Synchronous Condenser, Static Var Compensator (SVC) and Static Synchronous Compensator (STATCOM). These technologies were defined, critically examined and compared, the most promising technology is recommended for the realisation of an effective, efficient, sustainable, qualitative and reliable electrical power network.
Distributed Generation (DG) has become an essential part of the smart grids due to the widespread integration of renewable energy sources. Reactive power compensation is still one of most important research topics in smart grids. DG units can be used for reactive power compensation purposes, therefore we can improve the voltage profile and minimize power losses in order to improve the power quality. In this paper two methods will be used to accomplish the mentioned tasks; the first technique depends on the reactive power demand change of the proposed network loads, whereas the second technique uses an algorithm to control DG units according to the measured voltage values in the feeders to generate the needed reactive power. Both methods were applied to different scenarios of DG unit positions and different reactive power values of loads. The chosen DG unit is made up of a Type-4 wind farm which could be used as a general unit where it is able to control reactive power generation in a wider range separately from active power. The simulation results show that using these two methods, the voltage profile could be improved, power losses reduced and the power factor increased according to the placement of DG units.
In the modern electric power industry, Flexible AC Transmission Systems (FACTS) have a special place. In connection with the increased interest in the development of “smart energy”, the use of such devices is becoming especially urgent. Their main function is the ability to manage modes in real time: maintain the necessary level of voltage in the grids, control the power flow, increase the capacity of power lines and increase the static and dynamic stability of the power grid. The problem of system reliability and stability is related to the task of definitions and optimizations and planning indicators, design and exploitation. The main aim of this article is the definition of the best placement of the STATCOM compensator in case to provide stability and reliability of the grid with the minimization of the power losses, using Particle Swarm Optimization algorithms. All calculations were performed in MATLAB.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.