RESUMO A indústria da construção civil tem um grande potencial para a reciclagem de resíduos mediante a incorporação desses materiais como agregados. O resíduo de EVA (Etileno-Acetato de Vinila) vem sendo utilizado como uma alterativa na produção de compósitos cimentícios leves em conjunto com fibras vegetais de Attalea funifera Martius (piaçava), como reforço. Neste trabalho, procurou-se modelar as propriedades mecânicas de resistência à compressão, resistência à tração e módulo de deformação de argamassas contendo agregados não convencionais como EVA e fibras de piaçava. Foi utilizado um modelo de regressão polinomial com três variáveis explicativas para modelar cada propriedade mecânica, utilizando como variáveis independentes as porcentagens de EVA e fibras presentes na mistura, e a relação água/cimento do material. A qualidade de ajuste dos modelos foi avaliada por meio de testes hipótese, e por critérios estatísticos, dentre deles Shapiro-Wilk, Durbin-Watson, Breusch-Pagan, coeficientes de determinação R2 e critério PRESS (Prediction Error Sum of Squares). Os resultados indicam que os modelos construídos reproduzem satisfatoriamente o comportamento do material. Por meio de simulações realizadas com os modelos propostos, constatou-se que a fibra de piaçava pode ser utilizada como reforço para melhorar as propriedades de resistência à tração e módulo de deformação para a argamassa, dessa forma, foi possível identificar uma proporção ótima entre os agregados.
The aim of this work is to determine the porosity of concrete by means of two NDT (non-destructive testing) using digital images. In one test, the images were obtained through X-ray microtomography and for another test via digital scanner. In both of the tests, the images were processed using techniques of mathematical morphology and pixel processing. For both NDT, it was used concrete samples with 20-30 MPa of compressive strength. The results for the porosity were compared with results obtained by the standard test proposed by NBR (Norma Brasileira) 9778 (2005) showing the compatibility between two studied methods and pattern method.
A porosidade é uma das propriedades dos concretos que está associada à sua qualidade por influenciar diretamente na sua resistência. A microtomografia é uma técnica não destrutiva para caracterização de materiais que permite a obtenção de imagens da sua estrutura interna. Informações sobre esta estrutura interna podem ser extraídas e analisadas utilizando técnicas de processamento e análise de imagens. O objetivo deste trabalho é implementar uma metodologia que, usando técnicas de processamento de imagens, permita analisar imagens geradas por microtomografia computadorizada com o intuito de determinar a porosidade em concretos.
This paper presents a method for determining the percentage of coarse aggregate in concrete specimens by image processing. The test pieces were produced with the aim of obtaining images of their cross sections through a scanner table. In order to increase the contrast between mortar and coarse aggregate the sliced surfaces were treated with the phenolphthale in solution. The images obtained in the scanner were processed in a program developed with MATLAB (matrix laboratory). The average coarse aggregate in each section and the mean of coarse aggregate per test body were calculated. With the results, it was revealed that the method returned satisfying results when compared to the original trace of the concrete.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.