Background The skin is colonized by a large number of microorganisms, most of which are beneficial or harmless. However, disease states of skin have specific microbiome compositions that are different from those of healthy skin. Gut microbiome modulation through fecal transplant has been proven as a valid therapeutic strategy in diseases such as Clostridium difficile infections. Therefore, techniques to modulate the skin microbiome composition may become an interesting therapeutic option in diseases affecting the skin such as psoriasis or acne vulgaris. Methods Here, we have used mixtures of different skin microbiome components to alter the composition of recipient skin microbiomes. Results We show that after sequential applications of a donor microbiome, the recipient microbiome becomes more similar to the donor. After intervention, an initial week-long phase is characterized by the dominance of donor strains. The level of engraftment depends on the composition of the recipient and donor microbiomes, and the applied bacterial load. We observed higher engraftment using a multi-strain donor solution with recipient skin rich in Cutibacterium acnes subtype H1 and Leifsonia . Conclusions We have demonstrated the use of living bacteria to modulate skin microbiome composition. Electronic supplementary material The online version of this article (10.1186/s40168-019-0709-3) contains supplementary material, which is available to authorized users.

Clayish earth-based mortars are been recognized, all over the world, as eco-efficient products for plastering. Apart from being a product with low embodied energy when compared to other types of plasters, their application on the interior surface of walls may give a strong contribution for the health and comfort of inhabitants. As part of an ongoing research regarding earth-based plasters this work assesses the influence of the addition of two types of natural fibres -oat straw and typha fiber-woll -on the characteristics of plastering mortars made with a clayish earth. Mechanical and physical characteristics were tested, showing that addition of these fibers contribute to decrease linear drying shrinkage and thermal conductivity, as well as promoting the adhesion strength of plaster to the substrate. The improvement of mechanical resistance reveal to be dependent on the type of fiber added while the hygroscopic capacity of the plaster is maintained regardless of the fiber additions.

This open-label, pilot study enrolled men and women (18years) with acne vulgaris. In 14 enrolled patients, skin microbiome composition shifted towards study formulations. No untoward tolerability, visible irritation, or significant flare-ups were observed. Non-inflamed lesions and skin pH were reduced. Modulation of Cutibacterium acnes towards the non-acne causing strains on the skin of patients with acne was safe. C. acnes was formerly thought to be the cardinal cause of acne; however, recently some, but not all, strains of C. acnes were found to be responsible. This microbiome modulation approach as therapy requires validation in future clinical studies. Imbalance in skin microflora, particularly related to certain Cutibacterium acnes strains, may trigger acne. Application of non-acne-causing strains to the skin may modulate the skin microbiome and thereby lead to a reduction in acne. This pilot study evaluates the safety and efficacy of microbiome modulation on acneprone skin. The study had 2 phases: active induction (5% benzoyl peroxide gel, 7 days) and interventional C. acnes strains treatment (5 weeks). Patients were randomized to either topical skin formulations PT1 (2 strains of C. acnes Single Locus Sequence Typing [SLST] type C3 and K8, 50% each) or PT2 (4 strains of C. acnes SLST type C3 [55%], K8 [5%], A5 [30%] and F4 [10%]). Safety and efficacy was evaluated in 14 patients (PT1=8/14, PT2=6/14). Skin microbiome composition shifted towards study formulations. No untoward adverse events, visible irritation, or significant flare-up were observed. Non-inflamed lesions and skin pH were reduced. Comedone counts improved clinically with no deterioration in inflammatory lesions.

Abstract. Clayish earth-based mortars can be considered eco-efficient products for indoor plastering since they can contribute to improve important aspects of building performance and sustainability. Apart from being products with low embodied energy when compared to other types of mortars used for interior plastering, mainly due to the use raw clay as natural binder, earth-based plasters may give a significant contribution for health and comfort of inhabitants. Due to high hygroscopicity of clay minerals, earth-based mortars present a high adsorption and desorption capacity, particularly when compared to other type of mortars for interior plastering. This capacity allows earth-based plasters to act as a moisture buffer, balancing the relative humidity of the indoor environment and, simultaneously, acting as a passive removal material, improving air quality. Therefore, earth-based plasters may also passively promote the energy efficiency of buildings, since they may contribute to decreasing the needs of mechanical ventilation and air conditioning. This study is part of an ongoing research regarding earth-based plasters and focuses on mortars specifically formulated with soils extracted from Portuguese 'Barrocal' region, in Algarve sedimentary basin. This region presents high potential for interior plastering due to regional geomorphology, that promote the occurrence of illitic soils characterized by a high adsorption capacity and low expansibility. More specifically, this study aims to assess how clayish earth and sand ratio of mortars formulation can influence the physical and mechanical properties of plasters. For this assessment four mortars were formulated with different volumetric proportions of clayish earth and siliceous sand. The results from the physical and mechanical characterization confirmed the significantly low linear shrinkage of all the four mortars, as well as their extraordinary adsorption-desorption capacity. These results presented a positive correlation with mortars´ clayish earth content and are consistent with the mineralogical analysis, that confirmed illite as the prevalent clay mineral in the clayish earth used for this study. Regarding mechanical resistance, although the promising results of the adhesion test, the flexural and compressive strength results suggest that the mechanical resistance of these mortars should be slightly improved. Considering the present results the mortars mechanical resistance improvement may be achieved through the formulation of mortars with higher clayish earth content, or alternatively, through the addition of natural fibers to mortars formulation, very common in this type of mortars. Both those options will be investigated in future research.

BackgroundThe skin is colonized by a large number of microorganisms, of which most are beneficial or harmless. However, disease states of skin have specific microbiome compositions that are different from those of healthy skin. Gut microbiome modulation through fecal transplant has proven as a valid therapeutic strategy in diseases such as Clostridium difficile infections. Therefore, techniques to modulate the skin microbiome composition may become an interesting therapeutic option in diseases affecting the skin such as psoriasis or acnes vulgaris.Here we have used mixtures of different skin microbiome components to alter the composition of a recipient skin microbiome.ResultsWe show that after sequential applications of a donor microbiome, the recipient microbiome becomes similar to that of the donor. After intervention, an initial, week-long phase is characterized by dominance of donor strains. The level of engraftment depends on the composition of the recipient and donor microbiomes, and the applied bacterial load. We observed higher engraftment using a multi-strain donor solution with recipient skin rich in Cutibacterium acnes subtype H1 and Leifsonia.ConclusionsWe have demonstrated the use of living bacteria to modulate skin microbiome composition.

No abstract

In Portugal a large number of vernacular earthen buildings present an advanced state of degradation. These buildings comprise historical, technological, architectonic, cultural and social recognized values and, therefore, efficient interventions are needed for their conservation. The knowledge of the properties that the materials used in their construction show nowadays is one of the bases to support future interventions. Unstabilized earthen samples were collected from the walls of six earthen buildings located in the region of Leiria, Portugal, built with rammed earth and/or adobe masonry. The samples were characterized by particle size distribution and through XRD, density, capillary, drying, dry abrasion, tensile and compressive flexural strength. Mechanical results of rammed earth were lower than adobe's, contrary to what was commonly found in other studies, and capillary coefficients of adobe were comparable to lime stabilized adobe from other regions. A surface protection by compatible renders, 2 respectively earthen-based and air lime-based, is strongly encouraged to extend the walls durability. Although based on a short sampling, this data gives initial support to future compatible, effective and reversible interventions in Leiria vernacular earthen buildings, contributing to the preservation of this earth-built heritage.

Earth-based mortars have been used all over the world since ancient times in an extensive range of building types from vernacular architecture to monuments.Plastering is one of the most common contemporary applications of earth-based mortars used for earthen-building conservation or modern architecture. Raw earth is a very diverse natural material, and clay minerals play a key role in plaster properties being responsible for their setting process and providing the capacity of balancing the indoor hygrometric conditions of buildings. This capacity offers significant benefits to energy savings delivering comfort and health of inhabitants and also contributes to building conservation. For this study, three mortars were produced with different clayish earths to assess the influence of clay mineralogy. Mortars characterization confirmed that clay mineralogy drives important plaster properties, such as vapour adsorption and drying shrinkage, while also having a significant influence on mechanical strength, dry abrasion, and thermal conductivity. Within the studied mortars, illitic clayish earth stands outs as more adequate for earth-based plasters, showing balanced properties, namely linear drying shrinkage, mechanical strength, dry abrasion, and water vapour adsorption.