The Ploeg and Funke TYPE E double-actuated wavemaker has been calibrated at the CEPYC-CEDEX Laboratory in Madrid, Spain. TYPE E double-actuated wavemakers are capable of operating as piston-only, hinged-only, or simultaneously as both piston and hinged wavemakers. An eigenfunction expansion for the fluid motion generated by a generic planar wavemaker of variable-draft is used to describe the motion of double-actuated wavemakers. This generic solution appears to be more robust and easier to apply in numerical codes than the ones that require the amplitude of the wavemaker stroke be specified at the still-water-level and that require the draft of the hinge to be forced to minus infinity in order to recover a piston wavemaker. The dimensionless transfer functions for the ratio of the wavemaker stroke to the wave amplitude are derived by equating the total average power generated by both actuators to the energy flux in the propagating wave. The solution is not unique because both the ratio of the amplitude of the piston actuator to the amplitude of the hinge actuator and the relative phase angle between the motion of the two actuators are arbitrary. Experimental verifications of the theory are given for each actuator operating independently as well as for three ratios of the piston amplitude to hinge amplitude when the relative phase angle is zero. These calibrations indicate that TYPE E double-actuated wavemakers are perhaps the optimum wavemakers for simulating double-peaked spectra such as the six parameter Ochi-Hubble spectra where the hinge actuator is optimum for generating the higher frequency components.
RÉSUMÉUn générateur de houle a double actionneur (TYPE E dans la classification de Ploeg et Funke) a été calibre au laboratoire CEPYC-CEDEX a Madrid en Espagne. Les générateurs de houle du TYPE E cumulent les possibilités d'opérer en mode piston, en mode volet ou simultanément en mode mixte piston/volet. Une decomposition du mouvement du fluide produit par un batteur plan de cote variable par rapport au fond sur une base de fonctions propres données est adoptée pour représenter le mouvement de générateur de houle a double actionneur. Cette solution générale apparaït plus robuste et plus facile a appliquer dans les codes numériques que celles qui imposent que l'amplitude du mouvement du batteur soit spécifiée au niveau de la surface libre au repos ou qui obligent a forcer la cote du batteur volet a "moins l'infini" pour retrouver un batteur piston. Les fonctions de transfert adimensionnelles donnant le rapport de la course du batteur a l'amplitude de la houle sont obtenues en égalant l'énergie totale délivrée par les deux actionneurs au flux d'énergie de la houle générée. La solution obtenue n'est pas unique ïi cause des valeurs arbitrages pouvant être choisies pour le rapport des amplitudes de l'actionncur piston et de l'actionneur volet d'une part, et pour le déphasage relatif entre les
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.