The unidirectional motion of information carriers such as domain walls in magnetic nanostrips is a key feature for many future spintronic applications based on shift registers. This magnetic ratchet effect has so far been achieved in a limited number of complex nanomagnetic structures, for example, by lithographically engineered pinning sites. Here we report on a simple remagnetization ratchet originated in the asymmetric potential from the designed increasing lengths of magnetostatically coupled ferromagnetic segments in FeCo/Cu cylindrical nanowires. The magnetization reversal in neighboring segments propagates sequentially in steps starting from the shorter segments, irrespective of the applied field direction. This natural and efficient ratchet offers alternatives for the design of three-dimensional advanced storage and logic devices.

The surface and the internal magnetic structure of bamboo-like cylindrical nanowires with tailored diameter modulations have been determined by XMCD/PEEM and MFM.

Diameter-modulated nanowires offer an important paradigm to design the magnetization response of 3D magnetic nanostructures by engineering the domain wall pinning. With the aim to understand its nature and to control the process, we analyze the magnetization response in FeCo periodically modulated polycrystalline nanowires varying the minor segment diameter. Our modelling indicates a very complex behavior with a strong dependence on the disorder distribution and an important role of topologically non-trivial magnetization structures. We demonstrate that modulated nanowires with a small diameter difference are characterized by an increased coercive field in comparison to the straight ones, which is explained by a formation of topologically protected walls formed by two 3D skyrmions with opposite chiralities. For a large diameter difference we report the occurrence of a novel pinning type called here the "corkscrew": the magnetization of the large diameter segment forms a skyrmion tube with a core position in a helical modulation along the nanowire. This structure is pinned at the constriction and in order to penetrate the narrow segments the vortex/skyrmion core size should be reduced.

Cylindrical nanowires synthesized by controlled electrodeposition constitute excellent strategic candidates to engineer magnetic domain configurations. In this work, multisegmented CoNi/Ni nanowires are synthesized for tailoring a periodic magnetic structure determined by the balance between magnetocrystalline and magnetostatic energies. High-resolution Transmission Electron Microscopy confirms the segmented growth and the sharp transition between layers. Although both CoNi and Ni segments have similar fcc cubic crystal symmetry, their magnetic configuration is quite different as experimentally revealed by Magnetic Force Microscopy (MFM) imaging. While the Ni segments are single domain with axial magnetization direction, the CoNi segments present two main configurations: a single vortex state or a complex multivortex magnetic configuration, which is further interpreted with the help of micromagnetic simulations. This original outcome is ascribed to the tight competition between anisotropies. The almost monocrystalline fcc structure of the CoNi segments, as revealed by the electron diffraction patterns, which is atypical for its composition, contributes to balance the magnetocrystalline and shape anisotropies. The results of MFM measurements performed under in-plane magnetic field demonstrate that it is possible to switch from the multivortex configuration to a single vortex configuration with low magnetic fields.

We present experimental evidence of transverse magnetic domains, previously observed only in nanostrips, in CoNi cylindrical nanowires with designed crystal symmetry and tailored magnetic anisotropy. The transverse domains are found together with more conventional vortex domains along the same cylindrical nanowire, denoting a bistable system with similar energies. The surface and the inner magnetization distribution in both types of domains are analyzed by photoemission electron microscopy with x-ray magnetic circular dichroism contrast, and hysteresis loop in individual nanowires are measured by magneto-optical Kerr effect. These experimental data are understood and compared with complementary micromagnetic simulations.

Permalloy hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero topological charge at room temperature and in absence of DMI interaction.

Domain wall propagation in modulated-diameter cylindrical nanowires is a key phenomenon to be studied with a view to designing three-dimensional magnetic memory devices. This paper presents a theoretical study of transverse domain wall behavior under the influence of a magnetic field within a cylindrical nanowire with diameter modulations. In particular, domain wall pinning close to the diameter modulation was quantified, both numerically, using finite element micromagnetic simulations, and analytically. Qualitative analytical model for gently sloping modulations resulted in a simple scaling law which may be useful to guide nanowire design when analyzing experiments. It shows that the domain wall depinning field value is proportional to the modulation slope.

Cylindrical magnetic nanowires show great potential for 3D applications such as magnetic recording, shift registers, and logic gates, as well as in sensing architectures or biomedicine. Their cylindrical geometry leads to interesting properties of the local domain structure, leading to multifunctional responses to magnetic fields and electric currents, mechanical stresses, or thermal gradients. This review article is summarizing the work carried out in our group on the fabrication and magnetic characterization of cylindrical magnetic nanowires with modulated geometry and anisotropy. The nanowires are prepared by electrochemical methods allowing the fabrication of magnetic nanowires with precise control over geometry, morphology, and composition. Different routes to control the magnetization configuration and its dynamics through the geometry and magnetocrystalline anisotropy are presented. The diameter modulations change the typical single domain state present in cubic nanowires, providing the possibility to confine or pin circular domains or domain walls in each segment. The control and stabilization of domains and domain walls in cylindrical wires have been achieved in multisegmented structures by alternating magnetic segments of different magnetic properties (producing alternative anisotropy) or with non-magnetic layers. The results point out the relevance of the geometry and magnetocrystalline anisotropy to promote the occurrence of stable magnetochiral structures and provide further information for the design of cylindrical nanowires for multiple applications.