The unidirectional motion of information carriers such as domain walls in magnetic nanostrips is a key feature for many future spintronic applications based on shift registers. This magnetic ratchet effect has so far been achieved in a limited number of complex nanomagnetic structures, for example, by lithographically engineered pinning sites. Here we report on a simple remagnetization ratchet originated in the asymmetric potential from the designed increasing lengths of magnetostatically coupled ferromagnetic segments in FeCo/Cu cylindrical nanowires. The magnetization reversal in neighboring segments propagates sequentially in steps starting from the shorter segments, irrespective of the applied field direction. This natural and efficient ratchet offers alternatives for the design of three-dimensional advanced storage and logic devices.

The surface and the internal magnetic structure of bamboo-like cylindrical nanowires with tailored diameter modulations have been determined by XMCD/PEEM and MFM.

Diameter-modulated nanowires offer an important paradigm to design the magnetization response of 3D magnetic nanostructures by engineering the domain wall pinning. With the aim to understand its nature and to control the process, we analyze the magnetization response in FeCo periodically modulated polycrystalline nanowires varying the minor segment diameter. Our modelling indicates a very complex behavior with a strong dependence on the disorder distribution and an important role of topologically non-trivial magnetization structures. We demonstrate that modulated nanowires with a small diameter difference are characterized by an increased coercive field in comparison to the straight ones, which is explained by a formation of topologically protected walls formed by two 3D skyrmions with opposite chiralities. For a large diameter difference we report the occurrence of a novel pinning type called here the "corkscrew": the magnetization of the large diameter segment forms a skyrmion tube with a core position in a helical modulation along the nanowire. This structure is pinned at the constriction and in order to penetrate the narrow segments the vortex/skyrmion core size should be reduced.

The three dimensional nature of cylindrical magnetic nanowires has opened a new way to control the domain configuration as well as the magnetization reversal process. The pinning effect of the periodic diameter modulations on the domain wall propagation in FeCoCu individual nanowires is determined by Magnetic Force Microscopy, MFM. A main bistable magnetic configuration is firstly concluded from MFM images characterized by the spin reversal between two nearly single domain states with opposite axial magnetization. Complementary micromagnetic simulations confirm a vortex mediated magnetization reversal process. A non-standard variable field MFM imaging procedure allows us to observe metastable magnetic states where the propagating domain wall is pinned at certain positions with enlarged diameter. Moreover, it is demonstrated that it is possible to control the position of the pinned domain walls by an external magnetic field.

The comprehension of the magnetic configuration in FeCoCu nanowires with a diameter-modulated cylindrical geometry will allow controlling the domain wall motion in this low-dimensional system under the application of magnetic fields and/or the injection of current pulses. Here we perform a quantitative magnetic characterization of isolated diameter-modulated FeCoCu nanowires by combining nanoscale magnetic characterization techniques such as electron holography, magnetic force microscopy, and micromagnetic simulations. Local reconstructions of the magnetic distribution show the diameter-modulated geometry of the wires induces the formation of vortex-like structures and magnetic charges in the regions where the diameter is varied. Vortex-like structures modify the axial alignment of the magnetization in large-diameter segments. Moreover, the magnetic charges control the demagnetizing field distribution, promoting a flux-closure stray field configuration around large-diameter segments and keeping the demagnetizing field parallel to the NW's magnetization around small diameter segments. The detailed description of the remanent state in diameter-modulated cylindrical FeCoCu nanowires allows us to provide a clear explanation of the origin of bright and dark contrast observed in magnetic force microscopy images, which have the same feature of magnetic domain walls. This work establishes the primary knowledge required for future magnetization reversal studies with the aim of searching efficient modulated geometries that allow an optimum and controlled domain wall propagation.

Control over the magnetization reversal process of nanowires is essential to current advances in modern spintronic media and magnetic data storage. Much effort has been devoted to permalloy nanostrips with rectangular cross section and vanishing crystalline anisotropy. Our aim was to unveil and control the reversal process in FeCoCu nanowires with significant anisotropy and circular cross section with tailored periodical modulations in diameter. Magneto-optical Kerr effect measurements and their angular dependence performed on individual nanowires together with their analysis allow us to conclude that the demagnetization process takes place due to the propagation of a single vortex domain wall which is eventually pinned at given modulations with slightly higher energy barrier. In addition these results create new expectations for further controlling of the propagation of single and multiple domain walls.

Cylindrical nanowires synthesized by controlled electrodeposition constitute excellent strategic candidates to engineer magnetic domain configurations. In this work, multisegmented CoNi/Ni nanowires are synthesized for tailoring a periodic magnetic structure determined by the balance between magnetocrystalline and magnetostatic energies. High-resolution Transmission Electron Microscopy confirms the segmented growth and the sharp transition between layers. Although both CoNi and Ni segments have similar fcc cubic crystal symmetry, their magnetic configuration is quite different as experimentally revealed by Magnetic Force Microscopy (MFM) imaging. While the Ni segments are single domain with axial magnetization direction, the CoNi segments present two main configurations: a single vortex state or a complex multivortex magnetic configuration, which is further interpreted with the help of micromagnetic simulations. This original outcome is ascribed to the tight competition between anisotropies. The almost monocrystalline fcc structure of the CoNi segments, as revealed by the electron diffraction patterns, which is atypical for its composition, contributes to balance the magnetocrystalline and shape anisotropies. The results of MFM measurements performed under in-plane magnetic field demonstrate that it is possible to switch from the multivortex configuration to a single vortex configuration with low magnetic fields.

We present experimental evidence of transverse magnetic domains, previously observed only in nanostrips, in CoNi cylindrical nanowires with designed crystal symmetry and tailored magnetic anisotropy. The transverse domains are found together with more conventional vortex domains along the same cylindrical nanowire, denoting a bistable system with similar energies. The surface and the inner magnetization distribution in both types of domains are analyzed by photoemission electron microscopy with x-ray magnetic circular dichroism contrast, and hysteresis loop in individual nanowires are measured by magneto-optical Kerr effect. These experimental data are understood and compared with complementary micromagnetic simulations.