In this work, the exceptionally improved sensing capability of highly porous 3-D hybrid ceramic networks with respect to reducing gases is demonstrated for the first time. The 3-D hybrid ceramic networks are based on metal oxides Me= Fe, Cu, Al) doped and alloyed zinc oxide tetrapods (ZnO-T) forming numerous heterojunctions. A change in morphology of the samples and formation of different complex microstructures is achieved by mixing the metallic (Fe, Cu, Al) microparticles with ZnO tetrapods grown by flame transport synthesis (FTS) approach with different weight ratios (ZnO:Me, e.g., 20:1) and followed by subsequent thermal annealing them in air. The gas sensing studies reveal the possibility to control and change/tune the selectivity of the materials, depending on the elemental content ratio and the type of the added metal oxide in 3-D ZnO-T hybrid networks.While pristine ZnO-T networks showed a good response to H2 gas, a change/tune in selectivity to ethanol vapour with a decrease in optimal operating temperature was observed in the networks hybridized with Fe-oxide and Cu-oxide. In case of hybridization with ZnAl2O4 an improvement of H2 gas response (to ≈ 7.5) was reached at lower doping concentrations (20:1), whereas the increasing in concentration of ZnAl2O4 (10:1), the selectivity changes to methane CH4 gas (response ≈ 28). Selectivity tuning to different gases is attributed to the catalytic properties of the metal oxides after hybridization, while the sensitivity improvement is mainly associated with additional modulation of resistance by the built-in potential barriers between n-n and n-p heterojunctions, during adsorption and desorption of gaseous species. Density functional theory based calculations provided the mechanistic insights into the interactions between different hybrid networks and gas molecules supporting the experimentally observed results. The studied materials and sensor structures would provide particular advantages in the field of fundamental research, industrial and ecological applications.

Hybrid metal oxide nano-and microstructures exhibit novel properties, which make them promising candidates for a wide range of applications, including gas sensing. In this work, the characteristics of the hybrid ZnOBi 2 O 3 and ZnO-Zn 2 SnO 4 tetrapod (T) networks are investigated in detail. The gas sensing studies reveal improved performance of the hybrid networks compared to pure ZnO-T networks. For the ZnO-T-Bi 2 O 3 networks, an enhancement in H 2 gas response is obtained, although the observed p-type sensing behavior is attributed to the formed junctions between the arms of ZnO-T covered with Bi 2 O 3 and the modulation of the regions where holes accumulate under exposure to H 2 gas. In ZnO-T-Zn 2 SnO 4 networks, a change in selectivity to CO gas with high response is noted. The devices based on individual ZnO-T-Bi 2 O 3 and ZnO-T-Zn 2 SnO 4 structures showed an enhanced H 2 gas response, which is explained on the basis of interactions (electronic sensitization) between the ZnO-T arm and Bi 2 O 3 shell layer and single Schottky contact structure, respectively. Density functional theory-based calculations provide mechanistic insights into the interaction of H 2 and CO gas molecules with Bi-and Sn-doped ZnO(0001) surfaces, revealing changes in the Fermi energies, as well as charge transfer between the molecules and surface species, which facilitate gas sensing.

No abstract

No abstract

Changes made as a result of publishing processes such as copy-editing, formatting and page numbers may not be reflected in this version. For the definitive version of this publication, please refer to the published source. You are advised to consult the publisher's version if you wish to cite this paper.

Quasi-one-dimensional structures from metal oxides have shown remarkable potentials with regard to their applicability in advanced technologies ranging from ultraresponsive nanoelectronic devices to advanced healthcare tools. Particularly due to the piezoresistive effects, zinc oxide (ZnO)-based nanowires showed outstanding performance in a large number of applications, including energy harvesting, flexible electronics, smart sensors, etc. In the present work, we demonstrate the versatile crystal engineering of ZnO nano- and microwires (up to centimeter length scales) by a simple flame transport process. To investigate the piezoresistive properties, particular ZnO nanowires were integrated on an electrical push-to-pull device, which enables the application of tensile strain and measurement of in situ electrical properties. The results from ZnO nanowires revealed a periodic variation in stress with respect to the applied periodic potential, which has been discussed in terms of defect relaxations.

No abstract

In present work, the nano- and microscale tetrapods from zinc oxide were integrated on the surface of Aerographite material (as backbone) in carbon-metal oxide hybrid hierarchical network via a simple and single step magnetron sputtering process. The fabricated hybrid networks are characterized for morphology, microstructural and optical properties. The cathodoluminescence investigations revealed interesting luminescence features related to carbon impurities and inherent host defects in zinc oxide. Because of the wide bandgap of zinc oxide and its intrinsic defects, the hybrid network absorbs light in the UV and visible regions, however, this broadband photoabsorption behavior extends to the infrared (IR) region due to the dependence of the optical properties of ZnO architectures upon size and shape of constituent nanostructures and their doping by carbon impurities. Such a phenomenon of broadband photoabsorption ranging from UV to IR for zinc oxide based hybrid materials is novel. Additionally, the fabricated network exhibits strong visible light scattering behavior. The developed Aerographite/nanocrystalline ZnO hybrid network materials, equipped with broadband photoabsorption and strong light scattering, are very promising candidates for optoelectronic technologies.