Apesar da relevância geoeconômica da Baía de Santos, estudos sobre a composição de sua carcinofauna ainda são incipientes. Assim, este estudo fornece informações sobre a fauna de crustáceos da Baía de Santos, também copilando dados para Complexo baía-estuário de Santos-São Vicente e canal de Bertioga (CBESSB), localizado no litoral centro do estado de São Paulo. Foram realizadas quatro campanhas amostrais entre abril e dezembro de 2017 em seis pontos distintos, utilizando uma embarcação do tipo bote camaroeiro com esforço de captura padronizado. Também foi realizado um levantamento das espécies registradas no CBESSB. No total, foram registradas 102 espécies, pertencentes a 67 gêneros, 31 famílias, sete infraordens e três ordens. O monitoramento registrou um total de 13.404 exemplares (91.890,07 g), pertencentes a 18 espécies, 15 gêneros, 11 famílias, quatro infraordens e uma ordem. As espécies com a maior abundância numérica e em peso foram Xiphopenaeus kroyeri, Callinectes danae e Callinectes ornatus. No inverno, a faixa de média profundidade e o lado oeste da Baía de Santos apresentaram as maiores abundâncias. Apesar da antropização, o CBESSB apresenta elevada riqueza de crustáceos e sugere-se que seja monitorado constantemente com o objetivo de apoiar medidas de conservação e manejo, devido sua elevada importância ecológica, econômica e social para toda a região do litoral central do estado de São Paulo.
Background and Aim: Transplantation of bone marrow cells (BMC) was shown to improve liver function in animal models of cirrhosis. In this work we evaluated the effects of mononuclear BMC transplantation in rats submitted to bile duct ligation (BDL), a model of cholestatic liver disease. Methods: BDL was performed on Wistar rats, and two weeks later animals underwent a liver biopsy. At the same time, BMC group was injected with 1x10 6 mononuclear BMC and compared to untreated (BDL) and a fake-surgery (Sham) group. Animals were sacrificed two weeks later. Alkaline Phosphatase (ALP) and collagen deposition quantified by Sirius red staining were analyzed at both time points. MMP-9 expression assessed by immunohistochemistry and liver oxidative stress parameters (TBARS, SOD and catalase activity) was performed at four weeks. The effect of BMC-conditioned medium upon activated hepatic stellate cells was tested in vitro by MTT using GRX cells. Results: Treated animals showed a 25% decrease in ALP levels at four weeks. Collagen deposition in untreated group at 4 weeks had values 2-fold higher, compared to those found in the biopsy. In contrast, BMC-treated rats barely increased collagen deposition after treatment (p< 0.01). No difference was observed in MMP-9 expression nor in oxidative stress parameters. BMC-conditioned medium was able to induce cell death on GRX cells in vitro. Conclusions:A decrease in collagen deposition and a reduction in ALP levels suggest a better outcome in the treated group. The effect of BMC conditioned medium in vitro suggests a possible mechanism for the reduction of fibrosis observed in vivo.
Resumo: A padronização dos testes garante que a metodologia utilizada tenha uma reprodutibilidade do experimento e uma confiabilidade do resultado. No entanto, para realizar alguns testes em escala de laboratório, é necessária uma adaptação para ajustar a uma quantidade de amostra ou a um parâmetro não operacional. O objetivo deste trabalho foi validar e comparar dois testes diferentes de densidade aparente para biomassa, seguindo as normas ASTM E873 e DIN EN 17828, mas com alterações (escala laboratorial) no volume a ser medido da amostra e do recipiente. recipiente foi feito com dimensões reduzidas proporcionalmente. O procedimento foi realizado por 6 operadores (3 DIN e 3 ASTM) com seis materiais (biomassas) de diferentes características físicas. Os resultados mostraram que os procedimentos de ambos os padrões resultam em valores aproximados em relação à densidade aparente dos materiais. Também foi observado que a heterogeneidade do material e os procedimentos manuais (sugeridos pela norma) contribuíram para algumas divergências nos resultados. Por fim, concluiu-se que uma repetição maior é recomendada para reduzir o erro devido à variação dos resultados entre as medidas. The standardization of the tests ensures that the methodology used guarantees a reproducibility of the experiment and a reliability of the result. However, to perform some tests on a laboratory scale, an adaptation is necessary to adjust to a quantity of sample or to a non-operational parameter. The objective of this work was to validate and compare two different tests of apparent density for biomass, following the standards ASTM E873 and DIN EN 17828, but with changes (laboratory scale) in the volume to be measured of the sample and the container. The container was made with reduced dimensions proportionately. The procedure was performed by 6 operators (3 DIN and 3 ASTM) with six materials (biomass) of different physical characteristics. The results showed that the procedures of both standards result in approximate values in relation to the bulk density of the materials. It was also observed that the heterogeneity of the material and the manual procedures (suggested by the standard) contributed to some divergences in the results. Finally, it was concluded that a greater repetition is recommended to reduce the error due to variation of results between as measurements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.