Em seis indústrias madeireiras de Manaus, Amazonas, foi realizado um trabalho de pesquisa, com a utilização de um questionário,para averiguar as condições de uso e processamento da madeira e as medidas preventivas contra o ataque de insetos. Foram realizados, também,um levantamento da ocorrência de insetos em 19 espécies de madeiras utilizadas por essas indústrias e a avaliação do dano provocado pelas principais espécies de Coleoptera (besouros) e Isoptera (cupins). Das respostas apuradas, constatou-se que nenhuma das empresas visitadas emprega qualquer produto para prevenir o ataque de insetos às toras, assim como a secagem e a estocagem das toras são feitas de forma incorreta, contribuindo para aumentar a intensidade de ataque de insetos. Foram encontradas uma família de cupins e 16 de besouros, ressaltando que destas apenas cinco causam danos à madeira. Do total de 13 espécies de insetos coletados, destacam-se Xyleborus affinis Eichhoff e Platypus parallelus (Fabricius), encontradas em 18 espécies madeireiras, sendo conseqüentemente responsáveis pela maioria dos danos nas toras X. volvulus (Fabricius) e Platypus sp. foram encontradas em cinco espécies; X. ferrugineus (Fabricius) em três espécies; Minthea rugicolis Walk, Minthea sp. e Nasutitermes corniger (Motschulsky) em duas, e Dinoderus bifoveolatus Wollaston, Anoplotermes sp.; e Cnesinus sp. em uma. As espécies de madeiras que sofreram maior grau de deterioração, causada principalmente por coleópteros, foram Ceiba pentandra (L.) Gaertn. e Copaifera multijuga Hayne, seguidas por Couroupitaguianensis Aubl., Calophyllum brasiliense Cambess., Cedrela odorata L., Hevea brasiliensis Müll. Arg., Hura crepitans L., Hymenolobium sp., Maquira coriacea (Karsten) C.C. Berg, Nectandra sp., Virolasurinamensis Warb. e Vochysia sp.
Eschweilera truncata trees, known commercially by the name of Matamatá, are abundant, widely distributed throughout the forest, and characterized by important features for forest management, but are not harvested due to the scarcity of studies of the technological attributes that would reveal their potential, such as their machining and physical properties. Otherwise such studies might contribute to the inclusion of new species in the market, strengthening the sustainability of the forest ecosystems. Given this gap, the present research aimed to evaluate the performance of Matamatá wood in terms of its physical properties and behaviour under the machining process that would be used in this sector of the timber industry. The research involved a study of the tree, from which a base disk was removed in order to analyse its apparent density, density, shrinkage and anisotropy coefficient. The tradable shaft was split into logs and planks to assess the effects of machining processes. In the data analysis, we used descriptive statistics and the Tukey test. The results obtained classify Matamatá wood as high density and identify its anisotropy coefficient of 1.90, suggesting a medium to low stability. E. truncata wood performed excellently in the machining evaluation, and its results in the planer, sandpaper, drill perforation, frame in the top and lathe tests were also outstanding; in addition it presented wood material of the same quality throughout, whether heartwood or sapwood. This is an important indicator of wood yield, signifying that greater use can be made of the wood. The performance of the wood was validated via the manufacture of products such as furniture, decoration and finger-boards for musical instruments. In general, it can be concluded that the wood studied may be used in the lumber industry, because it presents similar features to those in the species already marketed and because it is plentiful all over the Amazon region.
O presente trabalho visa o estudo anatômico macroscópico de 80 espécies lenhosas da Amazônia representadas por 19 Famílias e 46 Gêneroe que apresentam raios considerados largos, segundo adaptação feita pela Divisão de Anatomia e Identificação de Madeiras/INPA, tomando como base a Norma Técnica COPANT (1974). Para cada espécie constam as seguintes informações: caracteres gerais, descrição macroscópica, usos comune, nomee vulgares, um atlas de fotomacrografias com 10x de aumento para auxiliar na identificação dae espécies, um gráfico comparativo contendo a classificação da largura doe raios estudados entre a Norma Técnica COPANT (1974) e a DAIM (1987), um histograma com a frequência da massa específica das espécies, uma listagem contendo as espécies estudadas com a classificação da massa específica, um índice alfabético por famílias e outro por nomee vulgares, ainda um glossário dos termos técnicos utilizados na descrição macroecópica de madeiras acompanhado de um desenho esquemático de um corpo de prova.
Foi investigada a distribuição de inclusões minerais (cristais e grãos de sílica) no xilema secundário de 53 famílias, representando 250 espécies de madeiras amazônicas. Grãos de silica ocorrem em cerca de 36% das espécies estudadas, frequentemente nas células dos raios. Cristais nas células dos raios são geralmente solitários, enquanto que nas fibras e células do parênquima axial são algumas vezes em cadeias cristalíferas. Os cristais são frequentemente do tipo prismático e somente em uma espécie (Scleronema micranthum)foi encontrado cristal do tipo drusa.
RESUMO É apresentado um estudo dos caracteres anatômicos de 5 espécies do gênero Sclerolobium (S. chrysophyllum Poepp. et Endl., S. eriopetalum Ducke, S. hypoleucum Benth., S. melanocarpum Ducke, S. subbullatum Ducke) e de 5 espécies do gênero Tachigalia (T. alba Ducke. T. cavipes (Spruce ex Benth.) Macbr., T. myrmecophila Ducke, T. paniculata Aubl., T. plumbea Ducke) pertencentes à família Leguminosae. Para cada espécie, são apresentadas informações sobre as características gerais da madeira, uma descrição microscópica e os usos comuns. É apresentado, ainda, um quadro sinótico com as principais características e diferenciações entre as espécies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.