Abstract-In this paper, a deterministic channel model for vehicle-to-vehicle (V2V) communication, is compared against channel measurement data collected during a V2V channel measurement campaign using a channel sounder. Channel metrics such as channel gain, delay and Doppler spreads, eigenvalue decomposition and antenna correlations are derived from the ray tracing (RT) simulations as well as from the measurement data obtained from two different measurements in an urban fourway intersection scenario. The channel metrics are compared separately for line-of-sight (LOS) and non-LOS (NLOS) situation. Most power contributions arise from the LOS component (if present) as well as from multipaths with single bounce reflections. Measurement and simulation results show a very good agreement in the presence of LOS, as most of the received power is contributed from the LOS component. In NLOS, the difference is large because the ray tracer is unable to capture some of the multi bounced propagation paths that are present in the measurements. Despite the limitations of the ray-based propagation model identified in this work, the model is suitable to characterize the channel properties in a sufficient manner.
Abstract. This paper presents a physical (PHY) layer simulator of the IEEE 802.11p standard for Wireless Access in Vehicular Environments (WAVE). This simulator allows the emulation of data transmission via different radio channels as well as the analysis of the resulting system behavior. The PHY layer simulator is part of an integrated simulation platform including a traffic model to generate realistic mobility of vehicles and a 3D ray-optical model to calculate the multipath propagation channel between transmitter and receiver. Besides deterministic channel modeling by means of ray-optical modeling, the simulator can also be used with stochastic channel models of typical vehicular scenarios. With the aid of this PHY layer simulator and the integrated channel models, the resulting performance of the system in terms of bit and packet error rates of different receiver designs can be analyzed in order to achieve a robust data transmission.
In this paper, a physical (PHY) layer performance comparison for 3GPP Long Term Evolution (LTE) and IEEE 802.11p in a realistic urban street intersection scenario is presented. For this approach standard compliant link level simulation tools in combination with ray-optical channel modeling are utilized. Results are analyzed with respect to an intersection collision warning application where a suitable performance metric is derived to analyze the individual performances with respect to the packet error ratio in the downlink. In the absence of a line of sight (LOS) path for a Vehicle-to-Vehicle (V2V) link, the results show promising potential of LTE to outperform a dedicated IEEE 802.11p based communication link even when considering full buffer intercell-interference condition.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.