Near‐infrared (NIR) sensors find numerous applications within various industry fields, including optical communications and medical diagnostics. However, the state‐of‐the‐art NIR sensors made of germanium (Ge) suffer from rather poor response, largely due to high reflection from the illuminated device surface. This work demonstrates a method to increase the sensitivity of Ge sensors by implementing nanostructures to the wafer surfaces. The absorbance of nanostructured Ge wafers is measured to be >99% in the whole UV–vis–NIR spectrum up to 1600 nm wavelength, which is a significant improvement to bare Ge wafers that reach absorption of only 63% in maximum. The process is shown to be capable of producing uniform nanostructures covering full 100 mm diameter substrates as well as wafers with etch mask openings of different sizes and shapes, which demonstrates its applicability to complementary metal oxide semiconductor (CMOS) sensor manufacturing. The results imply that nanostructured Ge has potential to revolutionize the sensitivity of Ge‐based sensors.
Desirable intrinsic properties, namely, narrow bandgap and high carrier mobility, make germanium (Ge) an excellent candidate for various applications, such as radiation detectors, multi-junction solar cells, and field effect transistors. Nevertheless, efficient surface passivation of Ge has been an everlasting challenge. In this work, we tackle this problem by applying thermal atomic layer deposited (ALD) aluminum oxide (Al2O3), with special focus on the process steps carried out prior to and after dielectric film deposition. Our results show that instead of conventional hydrofluoric acid (HF) dip, hydrochloric acid (HCI) pre-treatment is an essential process step needed to reach surface recombination velocities (SRVs) below 10 cm/s. The main reason for efficient surface passivation is found to be a high dielectric charge that promotes the so-called field-effect passivation. Furthermore, the results demonstrate that the post-deposition anneal temperature, time, and ambient play a role in passivating Ge-dangling bonds, but surprisingly, good surface passivation (SRV below 26 cm/s) is obtained even without any post-deposition annealing. The results pave the way for high-performance n-type Ge optoelectronic devices that could use induced junctions via negatively charged Al2O3 layers.
Nanostructured surfaces are known to provide excellent optical properties for various photonics devices. Fabrication of such nanoscale structures to germanium (Ge) surfaces by metal assisted chemical etching (MACE) is, however, challenging as Ge surface is highly reactive resulting often in micron-level rather than nanoscale structures. Here we show that by properly controlling the process, it is possible to confine the chemical reaction only to the vicinity of the metal nanoparticles and obtain nanostructures also in Ge. Furthermore, it is shown that controlling the density of the nanoparticles, concentration of oxidizing and dissolving agents as well as the etching time plays a crucial role in successful nanostructure formation. We also discuss the impact of high mobility of charge carriers on the chemical reactions taking place on Ge surfaces. As a result we propose a simple one-step MACE process that results in nanoscale structures with less than 10% surface reflectance in the wavelength region between 400 and 1600 nm. The method consumes only a small amount of Ge and is thus industrially viable and also applicable to thin Ge layers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.