Optical communications technology has made enormous and steady progress for several decades, providing the key resource in our increasingly information-driven society and economy. Much of this progress has been in finding innovative ways to increase the data carrying capacity of a single optical fibre. In this search, researchers have explored (and close to maximally exploited) every available degree of freedom, and even commercial systems now utilize multiplexing in time, wavelength, polarization, and phase to speed more information through the fibre infrastructure. Conspicuously, one potentially enormous source of improvement has however been left untapped in these systems: fibres can easily support hundreds of spatial modes, but today's commercial systems (single-mode or multi-mode) make no attempt to use these as parallel channels for independent signals.

A novel water-core microstructure fibre design allows nearly ideal guidance for aqueous sensing applications. The total internal reflection by a microstructured silica-air cladding provides robust confinement of light in a fluid-filled core, if the average cladding index is sufficiently below the index of water. Numerical results show dramatically improved loss and overlap of light with the sample, compared to evanescent-field fibres, indicating a direct improvement of sensor performance. A strategy for the improvement of evanescent-wave gas sensors is also discussed.

No abstract

We design and fabricate a novel multicore fiber (MCF), with seven cores arranged in a hexagonal array. The fiber properties of MCF including low crosstalk, attenuation and splice loss are described. A new tapered MCF connector (TMC), showing ultra-low crosstalk and losses, is also designed and fabricated for coupling the individual signals in-and-out of the MCF. We further propose a novel network configuration using parallel transmissions with the MCF and TMC for passive optical network (PON). To the best of our knowledge, we demonstrate the first bi-directional parallel transmissions of 1310 nm and 1490 nm signals over 11.3-km of seven-core MCF with 64-way splitter for PON.

No abstract

We describe a new multicore fiber (MCF) having seven single-mode cores arranged in a hexagonal array, exhibiting low crosstalk among the cores and low loss across the C and L bands. We experimentally demonstrate a record transmission capacity of 112 Tb/s over a 76.8-km MCF using space-division multiplexing and dense wavelength-division multiplexing (DWDM). Each core carries 160 107-Gb/s polarization-division multiplexed quadrature phase-shift keying (PDM-QPSK) channels on a 50-GHz grid in the C and L bands, resulting in an aggregate spectral efficiency of 14 b/s/Hz. We further investigate the impact of the inter-core crosstalk on a 107-Gb/s PDM-QPSK signal after transmitting through the center core of the MCF when all the 6 outer cores carry same-wavelength 107-Gb/s signals with equal powers, and discuss the system implications of core-to-core crosstalk on ultra-long-haul transmission.

This paper describes the physics and properties of a novel optical fiber that would be attractive for building highpower fiber lasers and amplifiers. Instead of propagating light in the fundamental, Gaussian-shaped mode, we describe a fiber in which the signal is forced to travel in a single, desired higher order mode (HOM). This provides for several advantages over the conventional approach, ranging from significantly higher ability to scale mode areas (and hence laser powers) to managing dispersion for ultra-short pulses -a capability that is practically nonexistent in conventional fibers. Particularly interesting is the fact that this approach challenges conventional wisdom, and demonstrates that for applications requiring meter-length fibers (as in high-power lasers), signal stability actually increases with mode order. Using this approach, we demonstrate mode areas exceeding 3200 μm 2 , and propagate signals with negligible mode distortions over up to 50-meter lengths. We describe several pulse propagation experiments in which we test the nonlinear response of this fiber platform, ranging from managing dispersive effects in femtosecond pulse systems, to reducing Brillouin scattering impairments in systems operating with the nanosecond pulses.Mode image, canonical refractive index profile and mode profile of HOM fibers typically used in the LMA designs.

Dense photonic integration promises to revolutionize optical computing and communications. However, efforts towards this goal face unacceptable attenuation of light caused by surface roughness in microscopic devices. Here we address this problem by introducing Surface Nanoscale Axial Photonics (SNAP). The SNAP platform is based on whispering gallery modes circulating around the optical fiber surface and undergoing slow axial propagation readily described by the one-dimensional Schrödinger equation. These modes can be steered with dramatically small nanoscale variation of the fiber radius, which is quite simple to introduce in practice. Extremely low loss of SNAP devices is achieved due to the low surface roughness inherent in a drawn fiber surface. In excellent agreement with the developed theory, we experimentally demonstrate localization of light in quantum wells, halting light by a point source, tunneling through potential barriers, dark states, etc. This demonstration has intriguing potential applications in filtering, switching, slowing light, and sensing.