INTRODUÇÃODurante 50 anos as micro-ondas foram utilizadas em diversos setores, como comunicação, terapia médica, secagem de madeira, vulcanização de borrachas e na indústria de alimentos. O uso de micro-ondas na síntese e processamento de cerâmicas, polímeros, metais, vidro e compósitos vem ganhando muito destaque devido à efi ciência e rapidez do processo, obtendo-se produtos equivalentes ou superiores aos obtidos por técnica convencional aliado à economia de tempo e consequentemente de energia [1]. O grupo de pesquisas do LaDProM/DEMa/UFSCar foi um dos pioneiros no país a estudar o processamento de cerâmicas utilizando energia de micro-ondas, tendo obtido vários sucessos na síntese de nanomateriais e compósitos, bem como na sinterização de cerâmicas [2][3][4][5][6][7] e mais recentemente na queima de porcelanas esmaltadas.A preocupação em redução de gastos energéticos cada vez mais tem pressionado o setor de processamento cerâmico a desenvolver e utilizar técnicas rápidas e efi cientes na produção de cerâmicas de alta qualidade. Cerâmicas convencionais esmaltadas têm sido obtidas pelos processos de biqueima e monoqueima. Na biqueima as peças cerâmicas são submetidas a dois tratamentos térmicos distintos. O suporte cerâmico é sinterizado e em seguida passa pela esmaltação; ocorre novamente a sinterização em menor temperatura para não comprometer o corpo cerâmico, estabilizando os esmaltes e as decorações aplicadas no suporte. Na monoqueima são sinterizados tanto o suporte cerâmico como o vidrado em um único processo. Nesse tratamento térmico ocorrem a consolidação do suporte e a estabilização do vidrado simultaneamente, proporcionando melhor interação e melhora da resistência da peça. Utiliza-se somente um forno para o processo designado por monoqueima, diminuindo os custos econômicos da fabricação dos produtos cerâmicos, comparados com a biqueima. Normalmente, a monoqueimadas porcelanas é feita em fornos contínuos ou intermitentes em tempos de processamento entre 5 e 8 h, dependendo da composição, geometria e dimensões da peça [8,9] ResumoA utilização da energia de micro-ondas no processamento de materiais cerâmicos apresenta vantagens quanto ao tempo de processo e homogeneidade microestrutural. Este trabalho tem como objetivo estudar a monoqueima de porcelanas de decoração esmaltada em um substrato de geometria complexa utilizando o aquecimento ultrarrápido híbrido por micro-ondas. As peças foram conformadas por colagem de barbotina e, ainda a verde, esmaltadas por imersão e queimadas pelo processo de monoqueima em forno convencional e em forno de micro-ondas. As peças queimadas por micro-ondas apresentaram características físicas, como aparência da superfície, adesão do esmalte, densidade aparente e resistência mecânica igual ou superior ao processo convencional de queima em apenas 24 min, equivalente a menos de 10% do tempo utilizado na sinterização convencional. Palavras-chave: porcelana, monoqueima, micro-ondas. AbstractThe
Fruit growing is a way to boost the economy of the Northeast. It is believed that the understanding of the chemical characteristics and nutritional value of fruits serves as a tool to propose improvements in the form of consumption and in the use of these foods. The exposed work aimed to evaluate the physical and chemical characteristics of tropical fruits sold in open markets in the city of Mossoró–RN. For this, pineapple, banana, mango and cashew fruits were purchased, these were cleaned and submitted to analyzes of pH, humidity, vitamin C, soluble solids and total soluble sugars. The results show that the analyzed fruits have an approximate pH value, with the average of the range between 3.9 – 4.2, showing that the fruits have an acid character. The moisture content varied between 81% and 71% for cashew and banana, respectively. The concentrations of vitamin C were quite variable, with cashew the most concentrated and pineapple the least, with an average of 49.5 and 17 mg of vitamin C/100 g of fruit, respectively. For soluble solids, pineapple and mango were the fruits with the highest concentration, however, when evaluated the total soluble sugars the banana is the fruit with the highest concentration. Therefore, it can be seen that tropical fruits had an excelente nutritional value and a high content of antioxidant compounds.
Intensive Care Units (ICUs) increasingly admit patients diagnosed with neurological disorders. The proven brain injury from trauma is considered a global health problem. The mortality of these patients is directly related to clinical severity and dependence on specialized care. Thus, it is necessary to elucidate the profile of patients admitted to the ICU diagnosed with a neurological disorder, in order to organize health interventions and act in the prevention of the triggering factors of these diseases, contributing to the systematization of nursing care in this sector. The presente study aimed to characterize the profile of patients admitted to the ICU with the diagnosis of neurological damage. For this, a quantitative research was carried out, based on the analysis of the medical records of users admitted to the ICU of the Regional Hospital Tarcísio de Vasconcelos Maia located in the city of Mossoró-RN. After analyzing the data, it was found that Cranioencephalic Trauma (TBI) was the most prevalente reason for hospitalization in the hospital’s emergency room and neurological damage was the most prevalente reason for admission to the ICU. Most of the patients with neurological disorders were men, with na average age of 47 years old. Regarding the outcome, 77.50% of users with neurological disorders died, with 37.71% diagnosed with TBI. The characteristics found in the research may contribute to the elaboration of care strategies to offer quality nursing care to patients diagnosed with neurological disorders, optimizing the care provided and adequate support.
A análise numérica por elementos finitos já se mostrou eficaz em vários problemas de engenharia. Esta pesquisa teve como objetivo adquirir numericamente, através de uma pesquisa experimental de análise numérica por elementos finitos, o perfil de tensão-deformação dos materiais AISI 310, 304L e 430, após ter sofrido uma entrada térmica da fonte de calor. Foi utilizado o software Ansys® Academic 2020 R1, que importou dados da literatura de geometria do material, malhas utilizadas, entrada térmica e propriedades térmicas. Depois disso, os materiais foram ajustados para ter suas propriedades estruturais transitórias. Gerando uma resposta estrutural de deformação à entrada térmica inserida. O perfil tensão-deformação de cada material foi construído de acordo com a tensão máxima obtida, tensões pontuais na geometria do material, tensão máxima obtida e deformações pontuais. Os dados de tensão e deformação máximos foram comparados entre os materiais usando a análise estatística ANOVA com o teste de Tukey. Os resultados mostraram a possibilidade de análise estrutural após carga térmica com as condições de contorno adotadas, utilizando o método dos elementos finitos. O teste estatístico mostrou que os três materiais estudados apresentaram diferenças significativas para tensão máxima e tensão máxima para p <0,05. A deformação dos materiais apresentou perfis convergentes com a literatura experimental e numérica. A pesquisa mostra uma metodologia com possível continuidade, pesquisando a formação de microestruturas e / ou sendo utilizada em outros materiais. Os resultados mostraram a possibilidade de análise estrutural após carga térmica com as condições de contorno adotadas, utilizando o método dos elementos finitos. O teste estatístico mostrou que os três materiais estudados apresentaram diferenças significativas para tensão máxima e tensão máxima para p <0,05. A deformação dos materiais apresentou perfis convergentes com a literatura experimental e numérica. A pesquisa mostra uma metodologia com possível continuidade, pesquisando a formação de microestruturas e / ou sendo utilizada em outros materiais. Os resultados mostraram a possibilidade de análise estrutural após carga térmica com as condições de contorno adotadas, utilizando o método dos elementos finitos. O teste estatístico mostrou que os três materiais estudados apresentaram diferenças significativas para tensão máxima e tensão máxima para p <0,05. A deformação dos materiais apresentou perfis convergentes com a literatura experimental e numérica. A pesquisa mostra uma metodologia com possível continuidade, pesquisando a formação de microestruturas e / ou sendo utilizada em outros materiais. A deformação dos materiais apresentou perfis convergentes com a literatura experimental e numérica. A pesquisa mostra uma metodologia com possível continuidade, pesquisando a formação de microestruturas e / ou sendo utilizada em outros materiais. A deformação dos materiais apresentou perfis convergentes com a literatura experimental e numérica. A pesquisa mostra uma metodologia com possível continuidade, pesquisando a formação de microestruturas e / ou sendo utilizada em outros materiais.
Anxiety – related disorders are a disease commonly identified in the Brazilian population. It is estimated that about 18.6 million people are addicted to benzodiazepines. Among the complaints reported by patients, we can identify anxiety disorders, mental suffering and vulnerability factors that arise dynamically throughout the life of each person. Thus, the present study aimed to track the epidemiological profile and the type of psychotherapy used in the treatment of patients who are part of the mental health group of a Basic Health Unit (UBS) in the city of Mossoró – RN. For this, a cross-sectional, descriptive, retrospective study with a quantitative approach was carried out, with the target population being all patients who made and use psychotropic medication in the Unit in question. Thus, of a total of 573 medical records present at the UBS, 36 fit as users of psychotherapeutic drugs, reflecting 6.28% of users of the health system. It was observed that the most prevalente age group using psychotropic drugs are between 60 – 69 years of age, constituting 36.11% of users. There is a discrepancy in the use of Clonazepam (with 55.5%) in relation to other drugs. There was also a prevalence of the use of psychiatric drugs by women and patients aged over 40 years. Thus, the present work proposes intervention measures to rationalize the use of psychotropic drugs, aiming at the participatory inclusion of the patient in the health system.
The green coconut (Cocos nucifera) is one of the most consumed fruits on the Brazilian coast, but it’s use generates an excess of waste that is improperly discarded by consumers. The biomass produced by the disposal of coconut is a potential input for making sustainable products. With this, the present work had as objective to use the coconut mesocarp in the making of biodegradable jars. In this way, the heating of the 5% starch solution was carried out by mixing the fragmented coconut mesocarp, serving as raw material for the production of the biodegradable ecological jug. After production, the jug was used for the cultivation of Phaseolus vulgaris L. seeds and the seed germination rate, height, number of leaves, seedling biomass and soluble sugar contente of the seedlings grown in biodegradable jars annd jars of polyethylene. As a results, it can be seen that seedlings grown in biodegradable jars, after 21 days of sowing, they had a significant increase in their height, number of leaves and biomass, when compared to the seedlings growing in polyethylene jars. Thus, it can be observed that the work proposes and excellent use to avoid the waste of the coconut mesocarp, providing a sustainable alternative to the use of plastic and an improvement in the cultivation of Phaseolus vulgaris L. seedlings.
The process of initial and continuing document formation is extremely important for the success of your professional career. However, it is commonly reported the presence of professionals teaching different disciplines in their area of training and there are also professionals without continuing education. Factors like these can directly interfere with the quality of students’ teaching and learning. Thus, the presente study aimed to outline the socio-professional profile and investigate the initial and continuing education of teachers in the Science discipline who teach in the state network of the municipality of Mossoró-RN. For this, a cross-sectional, descriptive, retrospective study with a quantitative approach was carried out, with the target population being teachers of the Science discipline of 20 schools in the state network of Mossoró-RN. It can be seen that the predominant age group of teachers is between 36-45 years (57.2%), the majority are women (57%), the most frequent civil status is married (42%), 56% of professionals have childrens. In relation to the work regime, 57% have a workload of 60 hours per week, complement the workload with another discipline and have between 5-10 years of teaching career. When the initial training is evaluated, it can be seen that all professionals have completed higher education at the State University of Rio Grande do Norte and that 57% have a degree in Biological Sciences. Finally, when evaluating continuing education, it is observed that 71% took graduate courses in the specialization modality, but do not carry out continuous training activities. Thus, it is observed that most professionals who teach the discipline of Sciences in the state network of the city of Mossoró-RN, have initial and continuing training, but they miss training courses for recycling knowledge. Thus, the work proposes the creation of participatory intervention projects that integrate public school teachers to update their knowledge.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.