A novel system of optical see-through augmented reality (AR) is proposed by making use of a holographic optical element (HOE) with full-color and lens-array functions. The full-color lens-array HOE provides see-through property with three-dimensional (3D) virtual images, for it functions as a conventional lens array only for Bragg-matched lights. An HOE recording setup was built, and it recorded a 30 mm × 60 mm sized full-color lens-array HOE by using the techniques of spatial multiplexing for large-area recording and wavelength multiplexing for full-color imaging. The experimental results confirm that the suggested full-color lens-array HOE can provide the full-color 3D virtual images in the optical see-through AR system.
Despite steady technological progress, displays are still subject to inherent limitations in resolution improvement and pixel miniaturization because a series of colours is generally expressed by a combination of at least three primary colour pixels. Here we propose a structure comprising a metal cavity and a nanoaperture, which we refer to as a cavity-aperture, to simultaneously control the colour and intensity of transmitted light in a single pixel. The metal cavity constructs plasmonic standing waves to organize the spatial distribution of amplitudes according to wavelength, and the nanoaperture permits light with a specific wavelength and amplitude to pass through it, depending on the nanoaperature's relative position in the cavity and the polarization state of the incident light. Therefore, the cavity-aperture has the potential to function as a dynamic colour pixel. This design method may be helpful in developing various photonic devices, such as micro-imaging systems and multiplexed sensors.
In this review paper, the recent progress of 3D applications using integral imaging is introduced. Thanks to the progress of the flat panel displays, the quality of the 3D displays has also improved, resulting in the opening of more applications of the 3D display. The previous studies on integral imaging emphasized the improvement of the viewing quality of the integral imaging system, but the emergence of new technologies requires more than the replacement of the current 2D displays. New applications of the integral imaging method, such as displays with augmented reality, 3D information capturing, real-time processing, the projection-type method, and the integral floating method, and their recent research trends, are introduced.
The principles and characteristics of see-through 3D displays are presented. We especially focus on the integral-imaging display system using a holographic optical element (IDHOE), which is able to display 3D images and satisfy the see-through property at the same time. The technique has the advantage of the high transparency and capability of displaying autostereoscopic 3D images. We have analyzed optical properties of IDHOE for both recording and displaying stages. Furthermore, various studies of new applications and system improvements for IDHOE are introduced. Thanks to the characteristics of holographic volume grating, it is possible to implement a full-color lens-array holographic optical element and conjugated reconstruction as well as 2D/3D convertible IDHOE. Studies on the improvements of viewing characteristics including a viewing angle, fill factor, and resolution are also presented. Lastly, essential issues and their possible solutions are discussed as future work.
A dual-view display system provides two different images in different directions. Most of them only present two-dimensional images for observers. In this paper, we propose a projection-type dual-view three-dimensional (3D) display system based on integral imaging. To assign directivities to the images, a projection-type display and dual-view screen with lenticular lenses are implemented. The lenticular lenses split the collimated image from the projection device into two different directions. The separated images are integrated by a single lens array in front of the screen, and full-parallax 3D images are observed in two different viewing regions. The visibility of the reconstructed 3D images can be improved by using high-density lenticular lenses and a high numerical aperture lens array. We explain the principle of the proposed method and verify the feasibility of the proposed system with simulations and experimental results.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.