Black locust is a fast-growing deciduous tree species with multiple industrial purposes due to its valuable traits. However, the heterogeneity of colour distribution between sapwood and heartwood limits its application. Thermal modification is an environment-friendly technology for improving various wood properties, especially dimensional stability, decay resistance, and colour homogeneity. In this work, black locust (Robinia pseudoacacia L.) wood samples were thermally modified at temperatures of 160, 180, and 210 °C. Extractives and main wood components were analysed by wet chemical methods, colour was measured by spectrometry, and structural changes by Fourier transform infrared spectroscopy. The obtained results show that the darkening of black locust wood, unlike other wood species of the temperate zone, is mainly caused by changes in extractives. Their content decreases during thermal treatment, but new chromophores are formed, especially in quinones. Degradation of hemicelluloses and the partial degradation of cellulose also contribute to colour changes. At higher temperatures, condensation reactions can occur in lignin, leading to the formation of some chromophores. Statistical analysis confirmed that temperature can be considered a very significant factor affecting the colour of the wood surface.
This article focuses on the issue of motor oils used in the engines of non-road mobile machinery (NRMM), more specifically tractors. The primary goal of the paper is to determine the appropriate replacement interval for these oils. The physical properties of the examined samples were first determined by conventional instruments. Furthermore, the concentrations of abrasive metals, contaminants, and additive elements were measured using an optical emission spectrometer. Lastly, the content of water, fuel, and glycol and the products of oxidation, nitration, and sulfation were determined by using infrared spectrometry. The measured values were compared to the limit values. Based on the processing and evaluation of these analyses, the overall condition of the oils was assessed and subsequently the optimal exchange interval of the examined oils was determined. In addition, a risk analysis of the outage was performed. Due to the high yields of crops, farmers can lose a significant amount of product when a tractor is not functioning during the harvest period. This loss is calculated in the paper.
The aim of this work was to determine the influence of aeration and time of extraction on the agrochemical properties of aqueous extracts from vermicomposts made from horse manure (M) and apple pomace (P) waste. There were two extract treatments: stirring without aeration (S), and stirring with aeration (A) for 48 h. Aeration significantly increased the levels of electrical conductivity (EC) and the concentration of [Formula: see text], [Formula: see text], and macro-elements in the extracts. In the (A) treatment, the extraction efficiency of K and Mg increased twofold, and the extraction efficiency of Ca and P increased by one-third compared with the (S) treatment. Simultaneously, the extracts prepared under aeration were characteristic with a higher pH value compared with non-aerated variants. The EC and content of macro-elements in the extracts increased proportionally with time. Their highest growth was found within the first 6 h. After 48 h, the highest release of macro-elements into the extract was found in the case of the horse manure under stirring with aeration.
Due to high levels of volatility in both the agricultural and the forestry commodity markets, specifically, of timber and agricultural crops, it is important to identify the risks associated with the stability of supplies necessary for the production of composite materials in the Czech Republic. This study aims to accurately estimate the availability of selected raw materials that contain lignocellulose over the next 20 years. In addition, their suitability for the production of composite materials is assessed based on their physical properties. Furthermore, in the event of scarcity involving timber in the European Union, recycled wood and post-harvest residues could replace conventional raw materials in wood-based composites such as particleboards and chipboards. The viable potential of Czech forests is predicted to be between 740 and 750 million cubic meters of timber. For agricultural crops, it is estimated at 0.9 million hectares of wheat and 0.5 million hectares of canola under the current EU biofuel policy and at 0.4 million hectares if this policy is removed. According to moisture and fibre analyses carried out in our study, the most suitable candidate for wood-based composites production is soft wood.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.